[Sun Jun  9 00:18:35 2013] Detection parameters:
  Position = (348.3, 281.4) = 16 53 54.52 -41 52 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.4 +/- 13.7
  Background counts = 21.0
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 00:18:36 2013] Off-axis axis estimate = 3.82'
[Sun Jun  9 00:19:49 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:49 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Jun  9 00:19:49 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Sun Jun  9 00:19:49 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.34"
[Sun Jun  9 00:19:51 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51.ximg exists
[Sun Jun  9 00:19:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51.csv
[Sun Jun  9 00:19:51 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Jun  9 00:19:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51.csv
[Sun Jun  9 00:19:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:52 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Jun  9 00:19:52 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Jun  9 00:19:52 2013] Fit fullrun_mos1_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Jun  9 00:20:39 2013] Warning, spatial fit 51 centroid is now closest to src. 73
[Sun Jun  9 00:20:39 2013] Spatial fit model total counts = 316.924000, observed total counts = 317.000000
[Sun Jun  9 00:20:39 2013] Offset between fit and detection position for source 77 = 0.328383 pixels
[Sun Jun  9 00:20:39 2013] Warning, changing simple spatial fit ID from 51 to 85
[Sun Jun  9 00:20:39 2013] 314.300700 total counts/ 269.238000 bgd. counts: snr = 2.746307
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.328383 pixels
  Position = (348.2, 281.7) = 16 53 54.55 -41 52 14.7
  Extent = 4.5" x 3.1", rotation angle = 359
  Source counts = 45.1 +/- 17.7
  Background counts = 269.2
  Rate = 0.001 +/- 0.0005
[Sun Jun  9 00:20:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:39 2013] Assessing source extent using major
[Sun Jun  9 00:20:39 2013] Source does appear to be extended
[Sun Jun  9 00:20:39 2013] Computing asymmetry using major and minor axis, asym = 1.43
[Sun Jun  9 00:21:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:34 2013] Initial guess for spatial extent in simple fitting = 3.79"
[Sun Jun  9 00:21:34 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.198
[Sun Jun  9 00:21:34 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 3.79"
[Sun Jun  9 00:21:35 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51.ximg exists
[Sun Jun  9 00:21:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51.csv
[Sun Jun  9 00:21:35 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Jun  9 00:21:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51.csv
[Sun Jun  9 00:21:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:37 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Jun  9 00:21:37 2013] fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Jun  9 00:21:37 2013] Fit fullrun_mos1_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Jun  9 00:22:19 2013] Spatial fit model total counts = 445.746000, observed total counts = 444.000000
[Sun Jun  9 00:22:19 2013] Offset between fit and detection position for source 77 = 0.270671 pixels
[Sun Jun  9 00:22:19 2013] 427.943000 total counts/ 383.294000 bgd. counts: snr = 2.280582
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.270671 pixels
  Position = (348.4, 281.4) = 16 53 54.50 -41 52 15.8
  Extent = 3.6 (2.6-4.9)", rotation angle = 0
  Source counts = 44.6 +/- 20.7
  Background counts = 383.3
  Rate = 0.001 +/- 0.0006
[Sun Jun  9 00:22:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:19 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:22:19 2013] Source does appear to be extended
[Sun Jun  9 00:22:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:23:59 2013] XMMSAS src. selection expression = ellipse(30259.852000, 24435.957600, 215.596806, 215.596806, 0.000000, X, Y)
[Sun Jun  9 00:23:59 2013] Not overwriting source region fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_src.reg
[Sun Jun  9 00:23:59 2013] Extracting stamp from image fullrun_mos1_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (336, 269) - (361, 294)
[Sun Jun  9 00:23:59 2013] XMMSAS bgd. selection expression = annulus(30259.852000, 24435.957600, 359.328010, 718.656021, X, Y) && !ellipse(29993.143219, 23803.776093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29533.831340, 24380.212000, 327.365609, 327.365609, 0.000000, X, Y) && !ellipse(31655.542023, 23635.622467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29700.611200, 25665.991690, 679.928020, 679.928020, 0.000000, X, Y)
[Sun Jun  9 00:23:59 2013] Writing fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77.gif
[Sun Jun  9 00:32:02 2013] Mean detx,y = (-3475.69, 2727.72) 
[Sun Jun  9 00:32:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 00:32:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 00:32:11 2013] Setting source spectrum file to fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sun Jun  9 00:32:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sun Jun  9 01:58:14 2013] Not generating rmf since there are only 44 counts
[Sun Jun  9 01:58:14 2013] rmf not generated due to insufficient counts
[Sun Jun  9 05:21:59 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:21:59 2013] Total counts from fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_src_b10.pi.gz = 74.00
[Sun Jun  9 05:21:59 2013] Total counts from fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_bgd.pi.gz = 86.00
[Sun Jun  9 05:21:59 2013] Got source and background scale factors 144000.000000, 588800.000000
[Sun Jun  9 05:21:59 2013] User source parameters:
  Position = (348.4, 281.4) = 16 53 54.50 -41 52 15.8
  Extent = 3.6 (2.6-4.9)", rotation angle = 0
  Source aperture counts = 53.0 +/- 9.6
  Background aperture counts = 21.0
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 05:22:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:22:11 2013] Using photon index=1.80, rate=0.00136, arf fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77.arf
[Sun Jun  9 05:22:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:22:11 2013] Updating source flux to 4.1e-14
[Sun Jun  9 05:22:47 2013] Source 77 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 05:23:06 2013] xmm0109490601/analysis//spectral/fullrun_mos1_xmm0109490601_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete