[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (262.5, 335.9) = 16 54 27.94 -41 48 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.5 +/- 19.2
  Background counts = 73.8
  Rate = 0.007 +/- 0.0009

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 3.77'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 8.31"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Tue Aug 14 08:30:50 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Tue Aug 14 18:45:35 2012] Source 92 is offset by 5.037875 and 5.810564 pixels which is larger than
2 X fitted extent = 1.004529 x 1.004529, not incorporating fit results
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 1154.100000, observed total counts = 796.000000
[Tue Aug 14 18:45:35 2012] Poor agreement between spatial fit and data for source 92
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 8.31"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 69 centroid is now closest to src. 20
[Wed Aug 15 06:29:00 2012] Source 92 is offset by 3.727989 and 0.209714 pixels which is larger than
2 X fitted extent = 1.386110 x 1.386110, not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(22789.969086, 29178.081085, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (225, 298) - (300, 373)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(22789.969086, 29178.081085, 1087.500000, 2175.000000, X, Y) && !ellipse(22803.265472, 31279.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21868.967300, 29168.350403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.665314, 27259.952515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.942932, 26906.453949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23693.597687, 26829.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.109880, 26797.133400, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(21290.880800, 31542.313840, 1049.760030, 429.639212, 90.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(20500.315628, 30903.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.899445, 28333.617157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24920.218567, 26926.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.922852, 26353.217529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.915985, 26150.989258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.680000, 26668.314000, 1059.624030, 1059.624030, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92.gif
[Wed Aug 15 07:24:46 2012] Mean detx,y = (-3730.28, -2188.16) 
[Wed Aug 15 07:24:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:25:12 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:25:13 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Aug 15 07:25:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Wed Aug 15 11:33:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 11:33:39 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:22 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:22 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Aug 15 17:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:29 2012] Using photon index=1.80, rate=0.00727, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src92.arf
[Wed Aug 15 17:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:29 2012] Updating source flux to 3.2e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting