[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (304.1, 349.7) = 16 54 11.76 -41 47 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 16.6
  Background counts = 91.5
  Rate = 0.004 +/- 0.0007

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 3.74'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 8.30"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75.csv
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75.csv
[Tue Aug 14 08:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 10.576517 pixels away
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 8.30"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Tue Aug 14 23:10:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:00 2012] Source 85 is offset by -3.073536 and -7.161083 pixels which is larger than
2 X fitted extent = 2.145669 x 2.145669, not incorporating fit results
[Wed Aug 15 06:29:00 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 15.019392 pixels away
[Wed Aug 15 06:29:00 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 10.577232 pixels away
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(26407.486328, 30373.101807, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (267, 312) - (342, 387)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(26407.486328, 30373.101807, 1087.500000, 2175.000000, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.101660, 30140.342200, 464.087213, 464.087213, 0.000000, X, Y) && !ellipse(28300.200958, 32342.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.950134, 30929.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(28771.123505, 32746.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(27626.742157, 32305.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85.gif
[Wed Aug 15 07:20:41 2012] Mean detx,y = (22.07, -2792.04) 
[Wed Aug 15 07:20:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:21:03 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:21:03 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Aug 15 07:21:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Wed Aug 15 10:38:05 2012] Not generating rmf since there are only 81 counts
[Wed Aug 15 10:38:05 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:22 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:22 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Aug 15 17:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:29 2012] Using photon index=1.80, rate=0.00365, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src85.arf
[Wed Aug 15 17:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:29 2012] Updating source flux to 1.4e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting