[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (289.6, 356.7) = 16 54 17.39 -41 46 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.6 +/- 23.1
  Background counts = 75.8
  Rate = 0.01 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 4.27'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 8.57"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue Aug 14 08:30:49 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Tue Aug 14 18:45:35 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 11.239753 pixels away
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 962.999000, observed total counts = 963.000000
[Tue Aug 14 18:45:35 2012] Offset between fit and detection position for source 82 = 0.486174 pixels
[Tue Aug 14 18:45:35 2012] 956.272000 total counts/ 746.359000 bgd. counts: snr = 7.683612
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 0.486174 pixels
  Position = (289.2, 356.5) = 16 54 17.56 -41 46 48.7
  Extent = 6.6 (4.8-9.2)", rotation angle = 0
  Source counts = 209.9 +/- 30.9
  Background counts = 746.4
  Rate = 0.007 +/- 0.001
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 6.57"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 6.57"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 61 centroid is now closest to src. 85
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(25109.927640, 30970.163800, 394.325677, 394.325677, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (267, 334) - (312, 379)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(25109.927640, 30970.163800, 657.209461, 1314.418922, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82.gif
[Wed Aug 15 07:18:48 2012] Mean detx,y = (-1160.09, -3649.73) 
[Wed Aug 15 07:18:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:19:06 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:19:07 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed Aug 15 07:19:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Wed Aug 15 17:44:21 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:21 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed Aug 15 17:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:29 2012] Using photon index=1.80, rate=0.0074, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src82.arf
[Wed Aug 15 17:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:29 2012] Updating source flux to 3.3e-14