[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (313.3, 361.3) = 16 54 8.20 -41 46 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.8 +/- 20.1
  Background counts = 79.6
  Rate = 0.009 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 4.68'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.790
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.77"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68.csv
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68.csv
[Tue Aug 14 08:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 1291.050000, observed total counts = 1101.000000
[Tue Aug 14 18:45:35 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:35 2012] Source is confused with source 79
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Tue Aug 14 18:46:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.790
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.77"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59.csv
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59.csv
[Tue Aug 14 23:10:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:00 2012] Spatial fit model total counts = 2127.210000, observed total counts = 1975.000000
[Wed Aug 15 06:29:00 2012] Offset between fit and detection position for source 78 = 0.987575 pixels
[Wed Aug 15 06:29:00 2012] Warning, changing simple spatial fit ID from 59 to 14
[Wed Aug 15 06:29:00 2012] 2069.573000 total counts/ 1246.940000 bgd. counts: snr = 23.296107
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.987575 pixels
  Position = (313.6, 360.4) = 16 54 8.05 -41 46 31.8
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 822.6 +/- 45.5
  Background counts = 1246.9
  Rate = 0.03 +/- 0.002
[Wed Aug 15 06:29:00 2012] Spatial fit model total counts = 1234.100000, observed total counts = 920.000000
[Wed Aug 15 06:29:00 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(27236.970000, 31306.434000, 1021.812029, 1021.812029, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (255, 302) - (372, 419)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(27236.970000, 31306.434000, 1703.020049, 3406.040098, X, Y) && !ellipse(26762.987740, 27739.075800, 447.280813, 447.280813, 0.000000, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.101660, 30140.342200, 464.087213, 464.087213, 0.000000, X, Y) && !ellipse(28596.204865, 34808.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.100000, 32948.898000, 303.776809, 303.776809, 0.000000, X, Y) && !ellipse(28300.200958, 32342.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.002655, 31603.139709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.281525, 31169.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.950134, 30929.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.665314, 27259.952515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29146.672089, 34847.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.219543, 34329.785767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31353.999725, 33966.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.290000, 34363.556000, 1565.592045, 1565.592045, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(28771.123505, 32746.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(29551.603882, 32394.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.742157, 32305.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.837952, 31569.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.682739, 29950.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30852.578857, 28895.365601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.747437, 27269.218567, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78.gif
[Wed Aug 15 07:17:40 2012] Mean detx,y = (1143.03, -3512.08) 
[Wed Aug 15 07:17:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:18:09 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:18:10 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Wed Aug 15 07:18:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Wed Aug 15 17:44:21 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:21 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Wed Aug 15 17:44:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:28 2012] Using photon index=1.80, rate=0.029, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src78.arf
[Wed Aug 15 17:44:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:28 2012] Updating source flux to 1.2e-13
[Wed Aug 15 17:53:41 2012] Flag p found in src. 78 procflags, skipping spectral fitting
[Wed Aug 15 17:53:41 2012] Flag c found in src. 78 procflags, skipping spectral fitting