[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (290.5, 372.4) = 16 54 17.05 -41 45 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.1 +/- 16.0
  Background counts = 59.2
  Rate = 0.005 +/- 0.0008

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 5.39'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.926
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.13"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Aug 14 08:30:49 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 846.234000, observed total counts = 846.000000
[Tue Aug 14 18:45:35 2012] Offset between fit and detection position for source 73 = 1.463194 pixels
[Tue Aug 14 18:45:35 2012] Warning, changing simple spatial fit ID from 63 to 61
[Tue Aug 14 18:45:35 2012] 737.313000 total counts/ 524.530000 bgd. counts: snr = 9.290771
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 1.463194 pixels
  Position = (290.0, 373.8) = 16 54 17.23 -41 45 33.6
  Extent = 18.7 (18.6-37.3)", rotation angle = 0
  Source counts = 212.8 +/- 27.2
  Background counts = 524.5
  Rate = 0.008 +/- 0.001
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:35 2012] Source is confused with source 70
[Tue Aug 14 18:46:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 18.67"
[Tue Aug 14 18:46:43 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.089
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 18.67"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 54 centroid is now closest to src. 85
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:07 2012] XMMSAS src. selection expression = ellipse(25184.554000, 32472.282000, 1120.038032, 1120.038032, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73_src.reg
[Wed Aug 15 06:30:07 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (226, 309) - (354, 438)
[Wed Aug 15 06:30:07 2012] XMMSAS bgd. selection expression = annulus(25184.554000, 32472.282000, 1866.730054, 3733.460107, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.101660, 30140.342200, 464.087213, 464.087213, 0.000000, X, Y) && !ellipse(29031.770386, 35695.240784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.204865, 34808.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.100000, 32948.898000, 303.776809, 303.776809, 0.000000, X, Y) && !ellipse(28300.200958, 32342.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.002655, 31603.139709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.265472, 31279.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.281525, 31169.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.950134, 30929.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21868.967300, 29168.350403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24974.692000, 36697.900000, 1763.080051, 1763.080051, 0.000000, X, Y) && !ellipse(29466.576569, 36467.198517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.772491, 36117.616119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.319153, 36065.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29146.672089, 34847.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.219543, 34329.785767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.290000, 34363.556000, 1565.592045, 1565.592045, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(28771.123505, 32746.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29551.603882, 32394.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.742157, 32305.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21290.880800, 31542.313840, 1049.760030, 429.639212, 90.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.969086, 29178.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.899445, 28333.617157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73.gif
[Wed Aug 15 07:14:46 2012] Mean detx,y = (-731.41, -5082.28) 
[Wed Aug 15 07:14:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:15:19 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:15:20 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Aug 15 07:15:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Aug 15 17:44:21 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:21 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Aug 15 17:44:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:28 2012] Using photon index=1.80, rate=0.0075, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src73.arf
[Wed Aug 15 17:44:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:28 2012] Updating source flux to 3e-14
[Wed Aug 15 17:53:41 2012] Flag c found in src. 73 procflags, skipping spectral fitting