[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (339.3, 419.7) = 16 53 58.10 -41 42 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.9 +/- 14.4
  Background counts = 38.8
  Rate = 0.006 +/- 0.0009

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 9.28'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 11.07"
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src47.ximg exists
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Aug 14 08:30:47 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src47 appears to have run properly
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47.csv
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47.csv
[Tue Aug 14 08:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 15.680396 pixels away
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Tue Aug 14 18:46:43 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 11.07"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Wed Aug 15 06:29:00 2012] Spatial fit model total counts = 523.683000, observed total counts = 476.000000
[Wed Aug 15 06:29:00 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:07 2012] XMMSAS src. selection expression = ellipse(29466.576569, 36467.198517, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56_src.reg
[Wed Aug 15 06:30:07 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (302, 382) - (377, 457)
[Wed Aug 15 06:30:07 2012] XMMSAS bgd. selection expression = annulus(29466.576569, 36467.198517, 1087.500000, 2175.000000, X, Y) && !ellipse(29031.770386, 35695.240784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.204865, 34808.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31941.180695, 36752.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.319153, 36065.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29146.672089, 34847.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.219543, 34329.785767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31353.999725, 33966.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.290000, 34363.556000, 1565.592045, 1565.592045, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56.gif
[Wed Aug 15 07:08:29 2012] Mean detx,y = (3897.69, -8395.15) 
[Wed Aug 15 07:08:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:08:50 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:08:51 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Aug 15 07:08:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed Aug 15 10:12:17 2012] Not generating rmf since there are only 88 counts
[Wed Aug 15 10:12:17 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:20 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:21 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Aug 15 17:44:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:28 2012] Using photon index=1.80, rate=0.00571, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src56.arf
[Wed Aug 15 17:44:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:28 2012] Updating source flux to 3.2e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting