[Tue Aug 14 04:26:57 2012] Detection parameters:
  Position = (396.5, 476.2) = 16 53 35.91 -41 38 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 14.4
  Background counts = 30.2
  Rate = 0.003 +/- 0.0005

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 14.72'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Tue Aug 14 04:30:58 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 13.79"
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35.csv
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35.csv
[Tue Aug 14 08:30:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Aug 14 08:30:49 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Aug 14 18:45:35 2012] Source 43 is offset by 6.659234 and 1.284900 pixels which is larger than
2 X fitted extent = 1.584947 x 1.584947, not incorporating fit results
[Tue Aug 14 18:45:35 2012] Source 43 is offset by -0.684260 and 8.045365 pixels which is larger than
2 X fitted extent = 1.552593 x 1.552593, not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Tue Aug 14 18:46:43 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 13.79"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Aug 15 06:29:00 2012] Spatial fit model total counts = 655.831000, observed total counts = 615.000000
[Wed Aug 15 06:29:00 2012] Offset between fit and detection position for source 43 = 1.011218 pixels
[Wed Aug 15 06:29:00 2012] 655.247500 total counts/ 586.597000 bgd. counts: snr = 2.834483
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.011218 pixels
  Position = (395.5, 476.1) = 16 53 36.30 -41 38 8.3
  Extent = 7.8 (3.9-11.0)", rotation angle = 0
  Source counts = 68.7 +/- 25.6
  Background counts = 586.6
  Rate = 0.002 +/- 0.0009
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:07 2012] XMMSAS src. selection expression = ellipse(34360.123800, 41369.903800, 466.802413, 466.802413, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43_src.reg
[Wed Aug 15 06:30:07 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (369, 449) - (422, 503)
[Wed Aug 15 06:30:07 2012] XMMSAS bgd. selection expression = annulus(34360.123800, 41369.903800, 778.004022, 1556.008045, X, Y) && !ellipse(33480.901215, 40555.003754, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:07 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43.gif
[Wed Aug 15 07:02:01 2012] Mean detx,y = (9479.46, -12614.94) 
[Wed Aug 15 07:02:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:02:26 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:02:27 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Aug 15 07:02:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Aug 15 10:06:20 2012] Not generating rmf since there are only 68 counts
[Wed Aug 15 10:06:20 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:20 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:20 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Aug 15 17:44:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:27 2012] Using photon index=1.80, rate=0.00242, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src43.arf
[Wed Aug 15 17:44:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:27 2012] Updating source flux to 2.7e-14
[Wed Aug 15 17:53:41 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Wed Aug 15 17:53:41 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting