[Tue Aug 14 04:26:56 2012] Detection parameters:
  Position = (355.7, 305.0) = 16 53 51.66 -41 50 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.4 +/- 25.4
  Background counts = 64.0
  Rate = 0.02 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 4.18'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.662
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.52"
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25.csv
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25.csv
[Tue Aug 14 08:30:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Aug 14 08:30:49 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Aug 14 08:30:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Aug 14 08:30:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Source 33 is offset by 0.129892 and 6.496779 pixels which is larger than
2 X fitted extent = 0.937692 x 0.937692, not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Tue Aug 14 18:46:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.662
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.52"
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25.ximg exists
[Tue Aug 14 23:10:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25.csv
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Aug 14 23:10:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25.csv
[Tue Aug 14 23:10:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Aug 14 23:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Aug 14 23:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Aug 14 23:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 25 centroid is now closest to src. 113
[Wed Aug 15 06:29:00 2012] Spatial fit model total counts = -5628.410000, observed total counts = 729.000000
[Wed Aug 15 06:29:00 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:06 2012] XMMSAS src. selection expression = ellipse(30898.991425, 26486.085815, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:06 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33_src.reg
[Wed Aug 15 06:30:06 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (318, 267) - (393, 342)
[Wed Aug 15 06:30:06 2012] XMMSAS bgd. selection expression = annulus(30898.991425, 26486.085815, 1087.500000, 2175.000000, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29504.981567, 24335.695282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(30852.578857, 28895.365601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31922.075104, 28180.164429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.747437, 27269.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.155457, 26567.372192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.823700, 26420.278259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.972687, 25517.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.336639, 24967.719696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30274.786072, 24329.702881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.392700, 23871.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31664.916931, 23677.412628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.868000, 23328.524000, 1269.952037, 1269.952037, 0.000000, X, Y)
[Wed Aug 15 06:30:06 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33.gif
[Wed Aug 15 06:56:05 2012] Mean detx,y = (4016.17, 1637.11) 
[Wed Aug 15 06:56:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:56:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:56:24 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Aug 15 06:56:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Aug 15 09:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 09:52:01 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:20 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:20 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Aug 15 17:44:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:27 2012] Using photon index=1.80, rate=0.017, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src33.arf
[Wed Aug 15 17:44:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:27 2012] Updating source flux to 6.7e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting