[Tue Aug 14 04:26:56 2012] Detection parameters:
  Position = (267.3, 313.9) = 16 54 26.08 -41 49 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1112.1 +/- 41.3
  Background counts = 91.8
  Rate = 0.06 +/- 0.002

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 2.52'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 10, frac = 0.486
[Tue Aug 14 04:30:58 2012] Skipping simple spatial due to low active detector fraction
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:35 2012] Source is confused with source 30
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 10, frac = 0.486
[Tue Aug 14 18:46:43 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:06 2012] Counts = 1112.062134, rescaling region sizes by 2.000000
[Wed Aug 15 06:30:06 2012] XMMSAS src. selection expression = ellipse(23206.665314, 27259.952515, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:06 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26_src.reg
[Wed Aug 15 06:30:06 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (192, 239) - (342, 389)
[Wed Aug 15 06:30:06 2012] XMMSAS bgd. selection expression = annulus(23206.665314, 27259.952515, 4350.000000, 8700.000000, X, Y) && !ellipse(26762.987740, 27739.075800, 447.280813, 447.280813, 0.000000, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.078000, 25993.076000, 392.844011, 392.844011, 0.000000, X, Y) && !ellipse(28215.101660, 30140.342200, 464.087213, 464.087213, 0.000000, X, Y) && !ellipse(29031.770386, 35695.240784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.204865, 34808.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20221.472504, 33294.210175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.100000, 32948.898000, 303.776809, 303.776809, 0.000000, X, Y) && !ellipse(28300.200958, 32342.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.002655, 31603.139709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.265472, 31279.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.281525, 31169.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.950134, 30929.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21868.967300, 29168.350403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19607.482376, 28771.099609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19568.238388, 27921.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19514.959915, 27150.124573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.664000, 27135.170000, 300.012009, 300.012009, 0.000000, X, Y) && !ellipse(24521.942932, 26906.453949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23693.597687, 26829.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.214000, 26488.104000, 286.852808, 286.852808, 0.000000, X, Y) && !ellipse(25793.109880, 26797.133400, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(30898.991425, 26486.085815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.834600, 25800.321800, 391.208011, 391.208011, 0.000000, X, Y) && !ellipse(27090.414720, 24935.822400, 410.275212, 410.275212, 0.000000, X, Y) && !ellipse(29504.981567, 24335.695282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30002.214000, 23753.490000, 314.588809, 314.588809, 0.000000, X, Y) && !ellipse(23405.566000, 22630.525400, 572.900016, 572.900016, 0.000000, X, Y) && !ellipse(21511.989319, 19286.300827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24974.692000, 36697.900000, 1763.080051, 1763.080051, 0.000000, X, Y) && !ellipse(31941.180695, 36752.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29466.576569, 36467.198517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.772491, 36117.616119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.319153, 36065.726227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15867.620056, 35204.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29146.672089, 34847.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.219543, 34329.785767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31353.999725, 33966.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.290000, 34363.556000, 1565.592045, 1565.592045, 0.000000, X, Y) && !ellipse(14737.497543, 32938.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(28771.123505, 32746.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(29551.603882, 32394.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.742157, 32305.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.837952, 31569.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21290.880800, 31542.313840, 1049.760030, 429.639212, 90.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(20500.315628, 30903.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16833.271600, 30769.672000, 983.760028, 320.099209, 90.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32725.709991, 29863.381317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.682739, 29950.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.969086, 29178.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30852.578857, 28895.365601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21155.899445, 28333.617157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31922.075104, 28180.164429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.747437, 27269.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24920.218567, 26926.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.155457, 26567.372192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.823700, 26420.278259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.922852, 26353.217529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.915985, 26150.989258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.680000, 26668.314000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(21877.952380, 25932.410400, 632.511218, 349.511210, 75.366000, X, Y) && !ellipse(25239.483185, 25611.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.972687, 25517.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.881042, 25465.519104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.434174, 25360.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18269.218000, 25125.215000, 1554.056045, 1554.056045, 0.000000, X, Y) && !ellipse(28261.336639, 24967.719696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21902.283936, 24859.636108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30274.786072, 24329.702881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.263275, 24440.202545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.456340, 24285.699600, 657.786419, 657.786419, 0.000000, X, Y) && !ellipse(26858.562531, 24000.596069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.392700, 23871.912109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18885.354400, 23839.770200, 378.052011, 378.052011, 0.000000, X, Y) && !ellipse(31664.916931, 23677.412628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27326.389313, 23609.088104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20688.866516, 23405.813751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.890503, 23429.419617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.868000, 23328.524000, 1269.952037, 1269.952037, 0.000000, X, Y) && !ellipse(21396.109238, 23161.848419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.481018, 22701.283142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.117340, 22615.969086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20955.854935, 22676.461273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20055.322098, 22740.452789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.355225, 22083.128601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17390.408127, 22208.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23930.516571, 21875.488052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.683685, 21673.158890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19241.348526, 21937.687424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23980.824066, 21202.653183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22290.603210, 21010.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20723.964676, 20976.779221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.432129, 20905.625763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20883.655396, 20517.229492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15751.112061, 20477.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29900.041962, 20219.872849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.280212, 19849.428558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27054.413422, 19399.551102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19370.300644, 19285.729996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23042.252625, 18924.388474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.645935, 19016.810043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.848480, 18138.864868, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:06 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26.gif
[Wed Aug 15 06:49:09 2012] Mean detx,y = (-3374.82, -144.19) 
[Wed Aug 15 06:49:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:50:54 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:50:54 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Aug 15 06:50:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Aug 15 09:16:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 09:16:12 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:19 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:19 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Aug 15 17:44:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:27 2012] Using photon index=1.80, rate=0.0612, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src26.arf
[Wed Aug 15 17:44:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:27 2012] Updating source flux to 2.8e-13
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting