[Tue Aug 14 04:26:56 2012] Detection parameters:
  Position = (289.3, 333.8) = 16 54 17.52 -41 48 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.9 +/- 27.7
  Background counts = 98.3
  Rate = 0.02 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 2.65'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.75"
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 08:30:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 1523.730000, observed total counts = 1242.000000
[Tue Aug 14 18:45:35 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.75"
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16.ximg exists
[Tue Aug 14 23:10:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16.csv
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Aug 14 23:10:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16.csv
[Tue Aug 14 23:10:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Aug 14 23:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Aug 14 23:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Aug 14 23:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 16 centroid is now closest to src. 23
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:05 2012] XMMSAS src. selection expression = ellipse(25119.489136, 28995.869080, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:05 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21_src.reg
[Wed Aug 15 06:30:05 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (252, 296) - (327, 371)
[Wed Aug 15 06:30:06 2012] XMMSAS bgd. selection expression = annulus(25119.489136, 28995.869080, 1087.500000, 2175.000000, X, Y) && !ellipse(26762.987740, 27739.075800, 447.280813, 447.280813, 0.000000, X, Y) && !ellipse(22803.265472, 31279.964233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.665314, 27259.952515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.664000, 27135.170000, 300.012009, 300.012009, 0.000000, X, Y) && !ellipse(24521.942932, 26906.453949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23693.597687, 26829.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.109880, 26797.133400, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.927640, 30970.163800, 525.767569, 525.767569, 0.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.969086, 29178.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24920.218567, 26926.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.155457, 26567.372192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.922852, 26353.217529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.915985, 26150.989258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.680000, 26668.314000, 1059.624030, 1059.624030, 0.000000, X, Y)
[Wed Aug 15 06:30:06 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21.gif
[Wed Aug 15 06:45:29 2012] Mean detx,y = (-1454.67, -1696.65) 
[Wed Aug 15 06:45:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:45:56 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:45:57 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Aug 15 06:45:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Aug 15 09:12:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 09:12:03 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:19 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:19 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Aug 15 17:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:26 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src21.arf
[Wed Aug 15 17:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:26 2012] Updating source flux to 6.6e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting