[Tue Aug 14 04:26:56 2012] Detection parameters:
  Position = (325.8, 372.3) = 16 54 3.30 -41 45 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.4 +/- 23.8
  Background counts = 67.5
  Rate = 0.01 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 5.71'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Tue Aug 14 04:30:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.28"
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 14 08:30:47 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 14 08:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 14 08:30:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 14 08:30:48 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Aug 14 18:45:35 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Tue Aug 14 18:45:35 2012] Spatial fit model total counts = 1321.330000, observed total counts = 920.000000
[Tue Aug 14 18:45:35 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:35 2012] Source is confused with source 72
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Tue Aug 14 18:46:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.28"
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug 14 23:10:31 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug 14 23:10:31 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug 14 23:10:33 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug 14 23:10:33 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Aug 15 06:29:00 2012] Source 13 is offset by -4.226265 and 6.211598 pixels which is larger than
2 X fitted extent = 2.059099 x 2.059099, not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:05 2012] XMMSAS src. selection expression = ellipse(28300.200958, 32342.029053, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:05 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13_src.reg
[Wed Aug 15 06:30:05 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (288, 335) - (363, 410)
[Wed Aug 15 06:30:05 2012] XMMSAS bgd. selection expression = annulus(28300.200958, 32342.029053, 1087.500000, 2175.000000, X, Y) && !ellipse(28215.101660, 30140.342200, 464.087213, 464.087213, 0.000000, X, Y) && !ellipse(28596.204865, 34808.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.100000, 32948.898000, 303.776809, 303.776809, 0.000000, X, Y) && !ellipse(29575.002655, 31603.139709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.281525, 31169.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.950134, 30929.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27471.130890, 30675.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29146.672089, 34847.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.219543, 34329.785767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.290000, 34363.556000, 1565.592045, 1565.592045, 0.000000, X, Y) && !ellipse(26019.861200, 32858.246800, 745.165621, 745.165621, 0.000000, X, Y) && !ellipse(28771.123505, 32746.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.554000, 32472.282000, 1493.384043, 1493.384043, 0.000000, X, Y) && !ellipse(29551.603882, 32394.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.742157, 32305.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.837952, 31569.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.970000, 31306.434000, 1362.416039, 1362.416039, 0.000000, X, Y) && !ellipse(27672.421936, 31061.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26407.486328, 30373.101807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.682739, 29950.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y)
[Wed Aug 15 06:30:05 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13.gif
[Wed Aug 15 06:40:40 2012] Mean detx,y = (2202.29, -4585.40) 
[Wed Aug 15 06:40:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 06:40:58 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 06:40:58 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Aug 15 06:40:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Aug 15 09:10:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 09:10:16 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:18 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:18 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Aug 15 17:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:26 2012] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src13.arf
[Wed Aug 15 17:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:26 2012] Updating source flux to 5.6e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting