[Tue Aug 14 04:26:58 2012] Detection parameters:
  Position = (287.0, 310.1) = 16 54 18.41 -41 50 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.4 +/- 24.4
  Background counts = 106.9
  Rate = 0.01 +/- 0.001

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 1.18'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.504
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 7.02"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:50 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Tue Aug 14 08:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92.csv
[Tue Aug 14 08:30:50 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Tue Aug 14 08:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92.csv
[Tue Aug 14 08:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:35 2012] Warning, spatial fit 92 centroid is now closest to src. 29
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:35 2012] Source is confused with source 29
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 9, frac = 0.504
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 7.02"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78.csv
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Tue Aug 14 23:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78.csv
[Tue Aug 14 23:10:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:00 2012] Source 102 is offset by -6.458246 and 2.707971 pixels which is larger than
2 X fitted extent = 3.636763 x 1.739959, not incorporating fit results
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(24920.218567, 26926.937500, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (249, 273) - (324, 348)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(24920.218567, 26926.937500, 1087.500000, 2175.000000, X, Y) && !ellipse(26762.987740, 27739.075800, 447.280813, 447.280813, 0.000000, X, Y) && !ellipse(26408.078000, 25993.076000, 392.844011, 392.844011, 0.000000, X, Y) && !ellipse(25119.489136, 28995.869080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.588684, 27990.802429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.665314, 27259.952515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.942932, 26906.453949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23693.597687, 26829.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.214000, 26488.104000, 286.852808, 286.852808, 0.000000, X, Y) && !ellipse(25793.109880, 26797.133400, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(27090.414720, 24935.822400, 410.275212, 410.275212, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.969086, 29178.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.559692, 28455.360870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.922852, 26353.217529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.915985, 26150.989258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.680000, 26668.314000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(25239.483185, 25611.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.881042, 25465.519104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.434174, 25360.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21902.283936, 24859.636108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.263275, 24440.202545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.456340, 24285.699600, 657.786419, 657.786419, 0.000000, X, Y) && !ellipse(26858.562531, 24000.596069, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102.gif
[Wed Aug 15 07:30:49 2012] Mean detx,y = (-1818.24, 368.50) 
[Wed Aug 15 07:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:31:10 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:31:11 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Wed Aug 15 07:31:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Wed Aug 15 11:40:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 11:40:28 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:22 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:22 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Wed Aug 15 17:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:29 2012] Using photon index=1.80, rate=0.012, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src102.arf
[Wed Aug 15 17:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:30 2012] Updating source flux to 6e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting