[Tue Aug 14 04:26:58 2012] Detection parameters:
  Position = (330.3, 314.0) = 16 54 1.57 -41 49 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.0 +/- 23.6
  Background counts = 97.1
  Rate = 0.009 +/- 0.0009

[Tue Aug 14 04:26:59 2012] Off-axis axis estimate = 2.57'
[Tue Aug 14 04:30:58 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:58 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Aug 14 04:30:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Tue Aug 14 04:30:58 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 7.71"
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90.csv
[Tue Aug 14 08:30:48 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90_1.ximg exists
[Tue Aug 14 08:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90.csv
[Tue Aug 14 08:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 08:30:50 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Tue Aug 14 08:30:50 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Tue Aug 14 08:30:50 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Tue Aug 14 18:45:35 2012] Source 100 is offset by 2.359534 and -5.910913 pixels which is larger than
2 X fitted extent = 1.147802 x 1.147802, not incorporating fit results
[Tue Aug 14 18:45:35 2012] Warning, spatial fit 90 centroid is now closest to src. 103
[Tue Aug 14 18:45:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:35 2012] Assessing source extent using major
[Tue Aug 14 18:45:35 2012] Source does appear to be extended
[Tue Aug 14 18:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:43 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:46:43 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Aug 14 18:46:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Tue Aug 14 18:46:43 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 7.71"
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77.csv
[Tue Aug 14 23:10:32 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue Aug 14 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77.csv
[Tue Aug 14 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue Aug 14 23:10:34 2012] fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue Aug 14 23:10:34 2012] Fit fullrun_pn_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Wed Aug 15 06:29:00 2012] Warning, spatial fit 77 centroid is now closest to src. 103
[Wed Aug 15 06:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:00 2012] Assessing source extent using major
[Wed Aug 15 06:29:00 2012] Source does appear to be extended
[Wed Aug 15 06:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:30:08 2012] XMMSAS src. selection expression = ellipse(28684.747437, 27269.218567, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing source region out to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100_src.reg
[Wed Aug 15 06:30:08 2012] Extracting stamp from image fullrun_pn_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (293, 276) - (368, 351)
[Wed Aug 15 06:30:08 2012] XMMSAS bgd. selection expression = annulus(28684.747437, 27269.218567, 1087.500000, 2175.000000, X, Y) && !ellipse(26762.987740, 27739.075800, 447.280813, 447.280813, 0.000000, X, Y) && !ellipse(28621.255066, 29256.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.078000, 25993.076000, 392.844011, 392.844011, 0.000000, X, Y) && !ellipse(27415.664000, 27135.170000, 300.012009, 300.012009, 0.000000, X, Y) && !ellipse(25793.109880, 26797.133400, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(30898.991425, 26486.085815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.834600, 25800.321800, 391.208011, 391.208011, 0.000000, X, Y) && !ellipse(27090.414720, 24935.822400, 410.275212, 410.275212, 0.000000, X, Y) && !ellipse(29504.981567, 24335.695282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.682739, 29950.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.624000, 29425.008000, 1367.280039, 1367.280039, 0.000000, X, Y) && !ellipse(27702.445007, 29165.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30852.578857, 28895.365601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.028534, 28294.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.660248, 27694.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.155457, 26567.372192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.680000, 26668.314000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(29924.972687, 25517.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.336639, 24967.719696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30274.786072, 24329.702881, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 06:30:08 2012] Writing fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100.gif
[Wed Aug 15 07:30:14 2012] Mean detx,y = (1868.54, 535.57) 
[Wed Aug 15 07:30:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:30:34 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:30:34 2012] Setting source spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Wed Aug 15 07:30:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Wed Aug 15 11:40:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 11:40:13 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:22 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:22 2012] Error reading totcts from fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Wed Aug 15 17:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:29 2012] Using photon index=1.80, rate=0.00891, arf fullrun_pn_xmm0109490501_pi300-10000_pass1_cl_src100.arf
[Wed Aug 15 17:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:29 2012] Updating source flux to 2.9e-14
[Wed Aug 15 17:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting