[Tue Aug 14 04:28:25 2012] Detection parameters: Position = (305.8, 277.9) = 16 54 11.08 -41 52 33.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 51.5 +/- 12.2 Background counts = 30.9 Rate = 0.002 +/- 0.0004 [Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 1.58' [Tue Aug 14 13:41:57 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 7.22" [Tue Aug 14 13:41:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857 [Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 7.22" [Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97.ximg exists [Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97.csv [Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97_1.ximg exists [Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97.csv [Tue Aug 14 18:45:10 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src97.ximg exists [Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists [Tue Aug 14 18:45:12 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly [Tue Aug 14 18:46:15 2012] Source 88 is offset by 7.459511 and 6.506294 pixels which is larger than 2 X fitted extent = 3.069444 x 3.069444, not incorporating fit results [Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000 [Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 14 18:46:15 2012] Assessing source extent using major [Tue Aug 14 18:46:15 2012] Source does appear to be extended [Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 15 02:47:02 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 7.22" [Wed Aug 15 02:47:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857 [Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 7.22" [Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87.ximg exists [Wed Aug 15 06:28:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87.csv [Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87_1.ximg exists [Wed Aug 15 06:28:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87.csv [Wed Aug 15 06:28:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src87.ximg exists [Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists [Wed Aug 15 06:28:37 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly [Wed Aug 15 06:29:38 2012] Source 88 is offset by -5.820167 and -6.773384 pixels which is larger than 2 X fitted extent = 0.829977 x 0.829977, not incorporating fit results [Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000 [Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 15 06:29:38 2012] Assessing source extent using major [Wed Aug 15 06:29:38 2012] Source does appear to be extended [Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 15 15:22:26 2012] XMMSAS src. selection expression = ellipse(26557.811432, 24125.881592, 652.500000, 652.500000, 0.000000, X, Y) [Wed Aug 15 15:22:26 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88_src.reg [Wed Aug 15 15:22:26 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (268, 240) - (343, 315) [Wed Aug 15 15:22:26 2012] XMMSAS bgd. selection expression = annulus(26557.811432, 24125.881592, 1087.500000, 2175.000000, X, Y) && !ellipse(26413.582540, 25982.583200, 399.295211, 399.295211, 0.000000, X, Y) && !ellipse(25716.612000, 26873.534000, 1068.616031, 1068.616031, 0.000000, X, Y) && !ellipse(27447.503784, 27096.599182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.451813, 26498.609589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.481400, 24927.428400, 453.008813, 453.008813, 0.000000, X, Y) && !ellipse(27549.188751, 25816.782135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.947800, 25608.192800, 539.466416, 539.466416, 0.000000, X, Y) && !ellipse(25090.000000, 25612.000000, 947.256027, 947.256027, 0.000000, X, Y) && !ellipse(23986.282806, 21878.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.526400, 22136.233600, 557.541616, 557.541616, 0.000000, X, Y) && !ellipse(26446.499329, 27007.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.722000, 26132.712000, 841.912024, 841.912024, 0.000000, X, Y) && !ellipse(27979.606171, 26573.523895, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 15 15:22:26 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88.gif [Wed Aug 15 15:53:59 2012] Mean detx,y = (848.16, -3475.52) [Wed Aug 15 15:54:02 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 15 15:54:16 2012] Binned source spectrum to 10 counts/bin [Wed Aug 15 15:54:17 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Wed Aug 15 15:54:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88_bgd.pi.gz [Wed Aug 15 17:42:32 2012] Not generating rmf since there are only 51 counts [Wed Aug 15 17:42:32 2012] rmf not generated due to insufficient counts [Wed Aug 15 17:44:46 2012] Updating aperture counts using extracted products [Wed Aug 15 17:44:46 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88_src_b10.pi.gz [Wed Aug 15 17:44:50 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 15 17:44:50 2012] Using photon index=1.80, rate=0.00179, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src88.arf [Wed Aug 15 17:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 15 17:44:50 2012] Updating source flux to 2.1e-14 [Wed Aug 15 17:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting