[Tue Aug 14 04:28:25 2012] Detection parameters:
  Position = (282.6, 292.8) = 16 54 20.12 -41 51 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 14.0
  Background counts = 34.0
  Rate = 0.003 +/- 0.0005

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 1.22'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Aug 14 13:41:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.115
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.04"
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57.csv
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57.csv
[Tue Aug 14 18:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue Aug 14 18:45:11 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue Aug 14 18:46:15 2012] Spatial fit model total counts = 576.472000, observed total counts = 574.000000
[Tue Aug 14 18:46:15 2012] Offset between fit and detection position for source 80 = 4.685022 pixels
[Tue Aug 14 18:46:15 2012] 566.745000 total counts/ 453.213000 bgd. counts: snr = 5.332945
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 4.685022 pixels
  Position = (286.8, 294.9) = 16 54 18.48 -41 51 17.0
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 113.5 +/- 23.8
  Background counts = 453.2
  Rate = 0.004 +/- 0.0008
[Tue Aug 14 18:46:15 2012] Spatial fit model total counts = 1314.280000, observed total counts = 1299.000000
[Tue Aug 14 18:46:15 2012] Offset between fit and detection position for source 80 = 2.113430 pixels
[Tue Aug 14 18:46:15 2012] Warning, changing simple spatial fit ID from 57 to 91
[Tue Aug 14 18:46:15 2012] 1459.862000 total counts/ 1089.430000 bgd. counts: snr = 11.222997
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 2.113430 pixels
  Position = (288.9, 294.9) = 16 54 17.65 -41 51 16.6
  Extent = 13.1 (13.1-13.2)", rotation angle = 0
  Source counts = 370.4 +/- 38.2
  Background counts = 1089.4
  Rate = 0.01 +/- 0.001
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:15 2012] Source is confused with source 78
[Wed Aug 15 02:47:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Wed Aug 15 02:47:02 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 13.14"
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52.csv
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52.csv
[Wed Aug 15 06:28:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed Aug 15 06:28:36 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Wed Aug 15 06:29:38 2012] Source 80 is offset by 6.149034 and 2.354920 pixels which is larger than
2 X fitted extent = 2.319012 x 2.319012, not incorporating fit results
[Wed Aug 15 06:29:38 2012] Warning, spatial fit 52 centroid is now closest to src. 76
[Wed Aug 15 06:29:38 2012] Spatial fit model total counts = 1298.690000, observed total counts = 1299.000000
[Wed Aug 15 06:29:38 2012] Offset between fit and detection position for source 80 = 0.000000 pixels
[Wed Aug 15 06:29:38 2012] Warning, changing simple spatial fit ID from 52 to 81
[Wed Aug 15 06:29:38 2012] 1419.512000 total counts/ 1116.660000 bgd. counts: snr = 9.062958
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.000000 pixels
  Position = (288.9, 294.9) = 16 54 17.65 -41 51 16.6
  Extent = 11.8 (10.4-13.2)", rotation angle = 0
  Source counts = 302.9 +/- 37.7
  Background counts = 1116.7
  Rate = 0.01 +/- 0.001
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:24 2012] XMMSAS src. selection expression = ellipse(25090.000000, 25612.000000, 710.442020, 710.442020, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80_src.reg
[Wed Aug 15 15:22:24 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (248, 254) - (330, 336)
[Wed Aug 15 15:22:24 2012] XMMSAS bgd. selection expression = annulus(25090.000000, 25612.000000, 1184.070034, 2368.140068, X, Y) && !ellipse(26763.056100, 27730.239600, 406.664812, 406.664812, 0.000000, X, Y) && !ellipse(26413.582540, 25982.583200, 399.295211, 399.295211, 0.000000, X, Y) && !ellipse(24575.343900, 26944.847200, 351.452810, 351.452810, 0.000000, X, Y) && !ellipse(23183.531560, 27249.196800, 433.887212, 335.834410, 243.459000, X, Y) && !ellipse(25716.612000, 26873.534000, 1068.616031, 1068.616031, 0.000000, X, Y) && !ellipse(27447.503784, 27096.599182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.451813, 26498.609589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23752.114000, 26830.388000, 470.875214, 470.875214, 0.000000, X, Y) && !ellipse(24631.706800, 28059.285400, 324.896009, 324.896009, 0.000000, X, Y) && !ellipse(27064.481400, 24927.428400, 453.008813, 453.008813, 0.000000, X, Y) && !ellipse(27549.188751, 25816.782135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.947800, 25608.192800, 539.466416, 539.466416, 0.000000, X, Y) && !ellipse(26422.530000, 27645.478000, 913.664026, 913.664026, 0.000000, X, Y) && !ellipse(23627.322800, 25354.771200, 351.838410, 351.838410, 0.000000, X, Y) && !ellipse(23100.608660, 28370.436400, 500.057614, 295.374408, 21.495400, X, Y) && !ellipse(24501.042542, 28570.825439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22520.017000, 26133.701200, 433.968012, 433.968012, 0.000000, X, Y) && !ellipse(26446.499329, 27007.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.722000, 26132.712000, 841.912024, 841.912024, 0.000000, X, Y) && !ellipse(21588.534800, 23604.656000, 1375.584040, 1375.584040, 0.000000, X, Y) && !ellipse(26641.306793, 28552.394226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.811432, 24125.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.606171, 26573.523895, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80.gif
[Wed Aug 15 15:42:59 2012] Mean detx,y = (2069.89, -1792.47) 
[Wed Aug 15 15:43:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:43:10 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:43:10 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Wed Aug 15 15:43:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Wed Aug 15 17:44:45 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:45 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Wed Aug 15 17:44:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:49 2012] Using photon index=1.80, rate=0.00978, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src80.arf
[Wed Aug 15 17:44:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:49 2012] Updating source flux to 1.1e-13
[Wed Aug 15 17:47:48 2012] Flag b found in src. 80 procflags, skipping spectral fitting
[Wed Aug 15 17:47:48 2012] Flag c found in src. 80 procflags, skipping spectral fitting