[Tue Aug 14 04:28:25 2012] Detection parameters:
  Position = (294.6, 300.2) = 16 54 15.45 -41 50 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.4 +/- 13.7
  Background counts = 37.8
  Rate = 0.002 +/- 0.0005

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 0.31'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 6.58 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Tue Aug 14 13:41:57 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 6.58"
[Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91.ximg exists
[Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91.csv
[Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91_1.ximg exists
[Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91.csv
[Tue Aug 14 18:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Tue Aug 14 18:45:12 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Tue Aug 14 18:46:15 2012] Source 76 is offset by -3.305317 and 6.262371 pixels which is larger than
2 X fitted extent = 0.762566 x 0.762566, not incorporating fit results
[Tue Aug 14 18:46:15 2012] Warning, spatial fit 91 centroid is now closest to src. 80
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:46:15 2012] Source is confused with source 78
[Wed Aug 15 02:47:02 2012] Using EEF radius (= 6.58 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Wed Aug 15 02:47:02 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 6.58"
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81.csv
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81_1.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81.csv
[Wed Aug 15 06:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Wed Aug 15 06:28:37 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Wed Aug 15 06:29:38 2012] Spatial fit model total counts = 870.449000, observed total counts = 869.000000
[Wed Aug 15 06:29:38 2012] Offset between fit and detection position for source 76 = 0.862495 pixels
[Wed Aug 15 06:29:38 2012] Warning, changing simple spatial fit ID from 81 to 52
[Wed Aug 15 06:29:38 2012] 761.221800 total counts/ 672.234000 bgd. counts: snr = 3.432181
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 0.862495 pixels
  Position = (295.0, 300.9) = 16 54 15.31 -41 50 50.5
  Extent = 10.5 (4.2-23.7)", rotation angle = 0
  Source counts = 89.0 +/- 27.6
  Background counts = 672.2
  Rate = 0.003 +/- 0.0009
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:26 2012] XMMSAS src. selection expression = ellipse(25614.722000, 26132.712000, 631.434018, 631.434018, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76_src.reg
[Wed Aug 15 15:22:26 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (259, 265) - (331, 337)
[Wed Aug 15 15:22:26 2012] XMMSAS bgd. selection expression = annulus(25614.722000, 26132.712000, 1052.390030, 2104.780061, X, Y) && !ellipse(26763.056100, 27730.239600, 406.664812, 406.664812, 0.000000, X, Y) && !ellipse(26413.582540, 25982.583200, 399.295211, 399.295211, 0.000000, X, Y) && !ellipse(24575.343900, 26944.847200, 351.452810, 351.452810, 0.000000, X, Y) && !ellipse(23183.531560, 27249.196800, 433.887212, 335.834410, 243.459000, X, Y) && !ellipse(25716.612000, 26873.534000, 1068.616031, 1068.616031, 0.000000, X, Y) && !ellipse(27447.503784, 27096.599182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.451813, 26498.609589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23752.114000, 26830.388000, 470.875214, 470.875214, 0.000000, X, Y) && !ellipse(24631.706800, 28059.285400, 324.896009, 324.896009, 0.000000, X, Y) && !ellipse(27064.481400, 24927.428400, 453.008813, 453.008813, 0.000000, X, Y) && !ellipse(27549.188751, 25816.782135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.947800, 25608.192800, 539.466416, 539.466416, 0.000000, X, Y) && !ellipse(26422.530000, 27645.478000, 913.664026, 913.664026, 0.000000, X, Y) && !ellipse(23627.322800, 25354.771200, 351.838410, 351.838410, 0.000000, X, Y) && !ellipse(23100.608660, 28370.436400, 500.057614, 295.374408, 21.495400, X, Y) && !ellipse(25090.000000, 25612.000000, 947.256027, 947.256027, 0.000000, X, Y) && !ellipse(24501.042542, 28570.825439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.499329, 27007.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27717.650360, 29028.722412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.306793, 28552.394226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.811432, 24125.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.606171, 26573.523895, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76.gif
[Wed Aug 15 15:52:31 2012] Mean detx,y = (1354.85, -1209.62) 
[Wed Aug 15 15:52:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:52:44 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:52:44 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed Aug 15 15:52:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Wed Aug 15 17:38:14 2012] Not generating rmf since there are only 88 counts
[Wed Aug 15 17:38:14 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:46 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:46 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed Aug 15 17:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:50 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src76.arf
[Wed Aug 15 17:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:50 2012] Updating source flux to 3.8e-14
[Wed Aug 15 17:47:48 2012] Flag b found in src. 76 procflags, skipping spectral fitting
[Wed Aug 15 17:47:48 2012] Flag c found in src. 76 procflags, skipping spectral fitting
[Wed Aug 15 17:47:48 2012] Source 76 has fewer than 100.000000 counts, skipping spectral fitting