[Tue Aug 14 04:28:24 2012] Detection parameters:
  Position = (299.3, 318.9) = 16 54 13.61 -41 49 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.3 +/- 18.1
  Background counts = 40.1
  Rate = 0.004 +/- 0.0006

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 1.48'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Tue Aug 14 13:41:57 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.17"
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38.csv
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38.csv
[Tue Aug 14 18:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Aug 14 18:45:11 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Tue Aug 14 18:46:15 2012] Warning, spatial fit 38 centroid is now closest to src. 51
[Tue Aug 14 18:46:15 2012] Spatial fit model total counts = 708.134000, observed total counts = 681.000000
[Tue Aug 14 18:46:15 2012] Offset between fit and detection position for source 58 = 2.238454 pixels
[Tue Aug 14 18:46:15 2012] Warning, changing simple spatial fit ID from 38 to 39
[Tue Aug 14 18:46:15 2012] 694.909100 total counts/ 646.202000 bgd. counts: snr = 1.916056
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 2.238454 pixels
  Position = (299.5, 321.1) = 16 54 13.55 -41 49 22.8
  Extent = 5.7 (4.0-10.0)", rotation angle = 0
  Source counts = 48.7 +/- 26.4
  Background counts = 646.2
  Rate = 0.002 +/- 0.0009
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:47:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Wed Aug 15 02:47:02 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.910
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 5.73"
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38.csv
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38.csv
[Wed Aug 15 06:28:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Aug 15 06:28:36 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Wed Aug 15 06:29:38 2012] Spatial fit model total counts = 1241.040000, observed total counts = 1237.000000
[Wed Aug 15 06:29:38 2012] Offset between fit and detection position for source 58 = 5.536584 pixels
[Wed Aug 15 06:29:38 2012] 1213.471000 total counts/ 634.391000 bgd. counts: snr = 22.991116
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 5.536584 pixels
  Position = (304.3, 318.3) = 16 54 11.69 -41 49 34.9
  Extent = 11.4 (11.4-11.4)", rotation angle = 0
  Source counts = 579.1 +/- 34.8
  Background counts = 634.4
  Rate = 0.02 +/- 0.001
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:29:38 2012] Source is confused with source 1
[Wed Aug 15 15:22:24 2012] XMMSAS src. selection expression = ellipse(26422.530000, 27645.478000, 685.248020, 685.248020, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58_src.reg
[Wed Aug 15 15:22:24 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (265, 279) - (344, 358)
[Wed Aug 15 15:22:24 2012] XMMSAS bgd. selection expression = annulus(26422.530000, 27645.478000, 1142.080033, 2284.160066, X, Y) && !ellipse(26763.056100, 27730.239600, 406.664812, 406.664812, 0.000000, X, Y) && !ellipse(28609.498000, 29046.944000, 445.987213, 445.987213, 0.000000, X, Y) && !ellipse(28202.411762, 30129.700181, 452.838550, 426.567306, 2.387501, X, Y) && !ellipse(26413.582540, 25982.583200, 399.295211, 399.295211, 0.000000, X, Y) && !ellipse(24575.343900, 26944.847200, 351.452810, 351.452810, 0.000000, X, Y) && !ellipse(25716.612000, 26873.534000, 1068.616031, 1068.616031, 0.000000, X, Y) && !ellipse(27447.503784, 27096.599182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.451813, 26498.609589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23752.114000, 26830.388000, 470.875214, 470.875214, 0.000000, X, Y) && !ellipse(24631.706800, 28059.285400, 324.896009, 324.896009, 0.000000, X, Y) && !ellipse(27064.481400, 24927.428400, 453.008813, 453.008813, 0.000000, X, Y) && !ellipse(25116.466400, 28984.073200, 405.336012, 253.509607, 89.962000, X, Y) && !ellipse(27549.188751, 25816.782135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.947800, 25608.192800, 539.466416, 539.466416, 0.000000, X, Y) && !ellipse(29015.524261, 29959.453552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29099.006348, 28278.681946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.000000, 25612.000000, 947.256027, 947.256027, 0.000000, X, Y) && !ellipse(24501.042542, 28570.825439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.920120, 29439.546000, 555.165616, 555.165616, 0.000000, X, Y) && !ellipse(26446.499329, 27007.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27717.650360, 29028.722412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.722000, 26132.712000, 841.912024, 841.912024, 0.000000, X, Y) && !ellipse(26641.306793, 28552.394226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.606171, 26573.523895, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58.gif
[Wed Aug 15 15:39:07 2012] Mean detx,y = (203.14, 35.26) 
[Wed Aug 15 15:39:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:39:18 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:39:18 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed Aug 15 15:39:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Wed Aug 15 17:44:44 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:44 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed Aug 15 17:44:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:48 2012] Using photon index=1.80, rate=0.0187, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src58.arf
[Wed Aug 15 17:44:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:48 2012] Updating source flux to 2.4e-13
[Wed Aug 15 17:47:48 2012] Flag c found in src. 58 procflags, skipping spectral fitting