[Tue Aug 14 04:28:24 2012] Detection parameters:
  Position = (319.2, 334.2) = 16 54 5.90 -41 48 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.1 +/- 13.4
  Background counts = 36.2
  Rate = 0.002 +/- 0.0005

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 3.00'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Aug 14 13:41:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.927
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 7.93"
[Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85.ximg exists
[Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85.csv
[Tue Aug 14 18:45:10 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85_1.ximg exists
[Tue Aug 14 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85.csv
[Tue Aug 14 18:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Tue Aug 14 18:45:12 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Tue Aug 14 18:45:12 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Tue Aug 14 18:46:15 2012] Source 45 is offset by 1.904993 and -6.025214 pixels which is larger than
2 X fitted extent = 0.969228 x 0.969228, not incorporating fit results
[Tue Aug 14 18:46:15 2012] Warning, spatial fit 85 centroid is now closest to src. 50
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:47:02 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Aug 15 02:47:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.927
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 7.93"
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77.csv
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77_1.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77.csv
[Wed Aug 15 06:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Wed Aug 15 06:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77.csv
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Wed Aug 15 06:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77.csv
[Wed Aug 15 06:28:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:29:38 2012] Warning, spatial fit 77 centroid is now closest to src. 50
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:26 2012] XMMSAS src. selection expression = ellipse(27717.650360, 29028.722412, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45_src.reg
[Wed Aug 15 15:22:26 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (282, 297) - (357, 372)
[Wed Aug 15 15:22:26 2012] XMMSAS bgd. selection expression = annulus(27717.650360, 29028.722412, 1087.500000, 2175.000000, X, Y) && !ellipse(26763.056100, 27730.239600, 406.664812, 406.664812, 0.000000, X, Y) && !ellipse(28609.498000, 29046.944000, 445.987213, 445.987213, 0.000000, X, Y) && !ellipse(28202.411762, 30129.700181, 452.838550, 426.567306, 2.387501, X, Y) && !ellipse(25716.612000, 26873.534000, 1068.616031, 1068.616031, 0.000000, X, Y) && !ellipse(30111.796800, 27560.822000, 382.578411, 382.578411, 0.000000, X, Y) && !ellipse(29339.316423, 31079.567693, 605.337617, 379.505433, -0.000000, X, Y) && !ellipse(27447.503784, 27096.599182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.451813, 26498.609589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.876200, 30702.792000, 368.755211, 368.755211, 0.000000, X, Y) && !ellipse(29594.535706, 31592.301880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.530000, 27645.478000, 913.664026, 913.664026, 0.000000, X, Y) && !ellipse(29015.524261, 29959.453552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29099.006348, 28278.681946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.549805, 30957.678192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27336.002000, 31667.798000, 1469.904042, 1469.904042, 0.000000, X, Y) && !ellipse(26446.499329, 27007.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.722000, 26132.712000, 841.912024, 841.912024, 0.000000, X, Y) && !ellipse(26641.306793, 28552.394226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.606171, 26573.523895, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45.gif
[Wed Aug 15 15:51:32 2012] Mean detx,y = (-1181.46, 1200.22) 
[Wed Aug 15 15:51:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:51:42 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:51:42 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Aug 15 15:51:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Aug 15 17:37:37 2012] Not generating rmf since there are only 62 counts
[Wed Aug 15 17:37:37 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:46 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:46 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Aug 15 17:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:50 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src45.arf
[Wed Aug 15 17:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:50 2012] Updating source flux to 2.6e-14
[Wed Aug 15 17:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting