[Tue Aug 14 04:28:24 2012] Detection parameters:
  Position = (342.6, 395.5) = 16 53 56.79 -41 44 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 9.7
  Background counts = 15.0
  Rate = 0.003 +/- 0.0006

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 7.73'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Tue Aug 14 13:41:57 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.548
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.29"
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55.csv
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55.csv
[Tue Aug 14 18:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Aug 14 18:45:11 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Aug 14 18:46:15 2012] Source 21 is offset by -1.231258 and -6.644597 pixels which is larger than
2 X fitted extent = 1.230202 x 1.230202, not incorporating fit results
[Tue Aug 14 18:46:15 2012] Source 21 is offset by -8.835028 and 3.111334 pixels which is larger than
2 X fitted extent = 1.190230 x 1.190230, not incorporating fit results
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:47:02 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Wed Aug 15 02:47:02 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.548
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 10.29"
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51.csv
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51_1.ximg exists
[Wed Aug 15 06:28:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51.csv
[Wed Aug 15 06:28:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Wed Aug 15 06:28:36 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Wed Aug 15 06:29:38 2012] Source 21 is offset by -1.231258 and -6.644597 pixels which is larger than
2 X fitted extent = 1.230202 x 1.230202, not incorporating fit results
[Wed Aug 15 06:29:38 2012] Warning, spatial fit 51 centroid is now closest to src. 17
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:24 2012] XMMSAS src. selection expression = ellipse(29758.600586, 34361.200073, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21_src.reg
[Wed Aug 15 15:22:24 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (305, 358) - (380, 433)
[Wed Aug 15 15:22:24 2012] XMMSAS bgd. selection expression = annulus(29758.600586, 34361.200073, 1087.500000, 2175.000000, X, Y) && !ellipse(29022.860107, 35691.595428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27703.012540, 32963.694000, 355.241610, 355.241610, 0.000000, X, Y) && !ellipse(28517.503516, 34841.789212, 653.841839, 280.129078, 341.366768, X, Y) && !ellipse(28277.434800, 32386.597200, 338.871210, 338.871210, 0.000000, X, Y) && !ellipse(29594.535706, 31592.301880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.224640, 32806.652000, 240.624007, 240.624007, 0.000000, X, Y) && !ellipse(27579.492800, 32287.670600, 346.647210, 346.647210, 0.000000, X, Y) && !ellipse(29573.797800, 32362.443000, 527.536815, 275.027208, 47.187300, X, Y) && !ellipse(27847.128174, 36067.213043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27336.002000, 31667.798000, 1469.904042, 1469.904042, 0.000000, X, Y) && !ellipse(33398.396000, 37585.164000, 1945.072056, 1945.072056, 0.000000, X, Y)
[Wed Aug 15 15:22:24 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21.gif
[Wed Aug 15 15:42:22 2012] Mean detx,y = (-3713.75, 6099.30) 
[Wed Aug 15 15:42:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:42:52 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:42:53 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Aug 15 15:42:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Aug 15 17:12:23 2012] Not generating rmf since there are only 49 counts
[Wed Aug 15 17:12:23 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:45 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:45 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Aug 15 17:44:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:49 2012] Using photon index=1.80, rate=0.00302, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src21.arf
[Wed Aug 15 17:44:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:49 2012] Updating source flux to 7.2e-14
[Wed Aug 15 17:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting