[Tue Aug 14 04:28:23 2012] Detection parameters:
  Position = (225.0, 409.0) = 16 54 42.50 -41 42 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.4 +/- 9.2
  Background counts = 10.4
  Rate = 0.001 +/- 0.0003

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 9.62'
[Tue Aug 14 13:41:58 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:58 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Tue Aug 14 13:41:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Tue Aug 14 13:41:58 2012] Giving source the simple spatial ID 105 for pass 0, mean size = 11.24"
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:47:02 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Wed Aug 15 02:47:02 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 11.24"
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93.csv
[Wed Aug 15 06:28:35 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93_1.ximg exists
[Wed Aug 15 06:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93.csv
[Wed Aug 15 06:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Wed Aug 15 06:28:37 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Wed Aug 15 06:28:37 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Wed Aug 15 06:29:38 2012] Warning: source 93 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.289772 pixels away
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:26 2012] XMMSAS src. selection expression = ellipse(19523.543625, 35531.919312, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18_src.reg
[Wed Aug 15 15:22:26 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (187, 371) - (262, 446)
[Wed Aug 15 15:22:26 2012] XMMSAS bgd. selection expression = annulus(19523.543625, 35531.919312, 1087.500000, 2175.000000, X, Y) && !ellipse(18851.746872, 37052.321838, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 15:22:26 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18.gif
[Wed Aug 15 15:56:46 2012] Mean detx,y = (6260.06, 8756.52) 
[Wed Aug 15 15:56:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:57:06 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:57:06 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 15 15:57:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Aug 15 17:43:09 2012] Not generating rmf since there are only 41 counts
[Wed Aug 15 17:43:09 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:47 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:47 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 15 17:44:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:51 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src18.arf
[Wed Aug 15 17:44:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:51 2012] Updating source flux to 3.4e-14
[Wed Aug 15 17:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting