[Tue Aug 14 04:28:23 2012] Detection parameters:
  Position = (432.7, 434.2) = 16 53 21.82 -41 41 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.5 +/- 12.2
  Background counts = 9.1
  Rate = 0.003 +/- 0.0004

[Tue Aug 14 04:28:25 2012] Off-axis axis estimate = 13.84'
[Tue Aug 14 13:41:57 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:41:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 13:41:57 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Tue Aug 14 13:41:57 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Tue Aug 14 13:41:57 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 13.35"
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61.csv
[Tue Aug 14 18:45:09 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Aug 14 18:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61.csv
[Tue Aug 14 18:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Aug 14 18:45:11 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Aug 14 18:45:11 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Tue Aug 14 18:46:15 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.695406 pixels away
[Tue Aug 14 18:46:15 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:46:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:46:15 2012] Assessing source extent using major
[Tue Aug 14 18:46:15 2012] Source does appear to be extended
[Tue Aug 14 18:46:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 02:47:02 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 02:47:02 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Wed Aug 15 02:47:02 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Wed Aug 15 02:47:02 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 13.35"
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src56.ximg exists
[Wed Aug 15 06:28:34 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed Aug 15 06:28:34 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_src56 appears to have run properly
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed Aug 15 06:28:36 2012] fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed Aug 15 06:28:36 2012] Fit fullrun_mos2_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Wed Aug 15 06:29:38 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.346792 pixels away
[Wed Aug 15 06:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:38 2012] Assessing source extent using major
[Wed Aug 15 06:29:38 2012] Source does appear to be extended
[Wed Aug 15 06:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 15:22:25 2012] XMMSAS src. selection expression = ellipse(37596.820557, 37729.436615, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 15:22:25 2012] Writing source region out to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10_src.reg
[Wed Aug 15 15:22:25 2012] Extracting stamp from image fullrun_mos2_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (395, 397) - (470, 472)
[Wed Aug 15 15:22:25 2012] XMMSAS bgd. selection expression = annulus(37596.820557, 37729.436615, 1087.500000, 2175.000000, X, Y)
[Wed Aug 15 15:22:25 2012] Writing fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10.gif
[Wed Aug 15 15:44:04 2012] Mean detx,y = (-11922.08, 8543.73) 
[Wed Aug 15 15:44:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 15:44:34 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 15:44:35 2012] Setting source spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug 15 15:44:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Aug 15 17:19:05 2012] Not generating rmf since there are only 87 counts
[Wed Aug 15 17:19:05 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:45 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:45 2012] Error reading totcts from fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug 15 17:44:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:49 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0109490501_pi300-10000_pass1_cl_src10.arf
[Wed Aug 15 17:44:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:49 2012] Updating source flux to 8.3e-14
[Wed Aug 15 17:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting