[Tue Aug 14 04:27:39 2012] Detection parameters:
  Position = (363.3, 208.4) = 16 53 48.66 -41 57 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.7 +/- 10.1
  Background counts = 11.3
  Rate = 0.003 +/- 0.0006

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 8.04'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Aug 14 08:30:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 10.45"
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48.csv
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48.csv
[Tue Aug 14 13:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue Aug 14 13:41:56 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue Aug 14 18:45:55 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 13.422429 pixels away
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:56 2012] Source is confused with source 40
[Tue Aug 14 23:10:35 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Aug 14 23:10:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 10.45"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src46.ximg exists
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed Aug 15 02:46:59 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src46 appears to have run properly
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Aug 15 02:47:01 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Wed Aug 15 06:29:19 2012] Warning, spatial fit 46 centroid is now closest to src. 40
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:15 2012] XMMSAS src. selection expression = ellipse(31559.124634, 18085.567810, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88_src.reg
[Wed Aug 15 13:41:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (326, 171) - (401, 246)
[Wed Aug 15 13:41:15 2012] XMMSAS bgd. selection expression = annulus(31559.124634, 18085.567810, 1087.500000, 2175.000000, X, Y) && !ellipse(31245.904000, 18122.146400, 1646.768047, 242.500807, 7.229000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88.gif
[Wed Aug 15 14:03:19 2012] Mean detx,y = (-9896.63, 3063.01) 
[Wed Aug 15 14:03:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:03:30 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:03:31 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed Aug 15 14:03:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Wed Aug 15 15:13:29 2012] Not generating rmf since there are only 54 counts
[Wed Aug 15 15:13:29 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:34 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:34 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed Aug 15 17:44:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:40 2012] Using photon index=1.80, rate=0.00317, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src88.arf
[Wed Aug 15 17:44:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:40 2012] Updating source flux to 6.3e-14
[Wed Aug 15 17:44:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting