[Tue Aug 14 04:27:39 2012] Detection parameters:
  Position = (307.5, 329.9) = 16 54 10.44 -41 48 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.8 +/- 15.1
  Background counts = 39.9
  Rate = 0.003 +/- 0.0005

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 2.38'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Tue Aug 14 08:30:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 7.62"
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65.csv
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65.csv
[Tue Aug 14 13:41:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Aug 14 13:41:57 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Aug 14 18:45:55 2012] Source 79 is offset by -4.219566 and -0.134094 pixels which is larger than
2 X fitted extent = 3.543664 x 3.543664, not incorporating fit results
[Tue Aug 14 18:45:55 2012] Source 79 is offset by -0.775582 and 5.953837 pixels which is larger than
2 X fitted extent = 1.660998 x 1.660998, not incorporating fit results
[Tue Aug 14 18:45:55 2012] Spatial fit model total counts = 692.385000, observed total counts = 669.000000
[Tue Aug 14 18:45:55 2012] Offset between fit and detection position for source 79 = 1.339824 pixels
[Tue Aug 14 18:45:55 2012] Warning, changing simple spatial fit ID from 65 to 76
[Tue Aug 14 18:45:55 2012] 580.180000 total counts/ 404.435000 bgd. counts: snr = 8.738937
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.339824 pixels
  Position = (308.8, 330.1) = 16 54 9.93 -41 48 43.7
  Extent = 15.7 (15.7-31.5)", rotation angle = 0
  Source counts = 175.7 +/- 24.1
  Background counts = 404.4
  Rate = 0.006 +/- 0.0008
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:56 2012] Source is confused with source 1
[Tue Aug 14 23:10:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 15.74"
[Tue Aug 14 23:10:35 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.944
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 15.74"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63.csv
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63_1.ximg exists
[Wed Aug 15 02:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63.csv
[Wed Aug 15 02:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Wed Aug 15 02:47:01 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Wed Aug 15 06:29:19 2012] Spatial fit model total counts = 812.561000, observed total counts = 774.000000
[Wed Aug 15 06:29:19 2012] Offset between fit and detection position for source 79 = 2.886481 pixels
[Wed Aug 15 06:29:19 2012] Warning, changing simple spatial fit ID from 63 to 51
[Wed Aug 15 06:29:19 2012] 734.193400 total counts/ 656.229000 bgd. counts: snr = 3.043467
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 2.886481 pixels
  Position = (311.7, 330.0) = 16 54 8.80 -41 48 43.9
  Extent = 7.4 (5.5-10.3)", rotation angle = 0
  Source counts = 78.0 +/- 27.1
  Background counts = 656.2
  Rate = 0.003 +/- 0.0009
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:15 2012] XMMSAS src. selection expression = ellipse(27068.410000, 28665.274000, 444.368413, 444.368413, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79_src.reg
[Wed Aug 15 13:41:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (286, 305) - (337, 356)
[Wed Aug 15 13:41:15 2012] XMMSAS bgd. selection expression = annulus(27068.410000, 28665.274000, 740.614021, 1481.228043, X, Y) && !ellipse(26776.610000, 27730.372000, 357.823210, 357.823210, 0.000000, X, Y) && !ellipse(28594.572000, 29067.918600, 392.056011, 392.056011, 0.000000, X, Y) && !ellipse(28211.026820, 30138.115200, 406.644012, 357.415210, 350.219340, X, Y) && !ellipse(25787.935960, 26802.492000, 799.854423, 799.854423, 0.000000, X, Y) && !ellipse(29394.788000, 31071.978000, 934.568027, 934.568027, 0.000000, X, Y) && !ellipse(25690.847035, 26907.411578, 1494.488043, 1294.929503, 130.173719, X, Y) && !ellipse(27434.621582, 27166.787537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29026.874512, 29956.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.214355, 29091.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.113037, 28259.231201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.454712, 29522.828674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.248580, 28445.024000, 274.796808, 274.796808, 0.000000, X, Y) && !ellipse(28686.478516, 27283.314117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.198822, 29092.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.698000, 30328.614200, 418.888012, 418.888012, 0.000000, X, Y) && !ellipse(26999.393250, 30387.959351, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79.gif
[Wed Aug 15 14:07:56 2012] Mean detx,y = (1165.74, 92.23) 
[Wed Aug 15 14:07:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:08:07 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:08:07 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed Aug 15 14:08:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Wed Aug 15 15:18:40 2012] Not generating rmf since there are only 77 counts
[Wed Aug 15 15:18:40 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:35 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:35 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed Aug 15 17:44:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:41 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src79.arf
[Wed Aug 15 17:44:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:41 2012] Updating source flux to 3.2e-14
[Wed Aug 15 17:44:55 2012] Flag b found in src. 79 procflags, skipping spectral fitting
[Wed Aug 15 17:44:55 2012] Flag c found in src. 79 procflags, skipping spectral fitting
[Wed Aug 15 17:44:55 2012] Source 79 has fewer than 100.000000 counts, skipping spectral fitting