[Tue Aug 14 04:27:39 2012] Detection parameters:
  Position = (262.3, 336.7) = 16 54 28.03 -41 48 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 11.8
  Background counts = 26.2
  Rate = 0.002 +/- 0.0005

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 3.82'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Tue Aug 14 08:30:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.34"
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73.csv
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73_1.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73.csv
[Tue Aug 14 13:41:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Tue Aug 14 13:41:57 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue Aug 14 18:45:55 2012] Source 74 is offset by 2.990959 and 3.362054 pixels which is larger than
2 X fitted extent = 1.489154 x 1.489154, not incorporating fit results
[Tue Aug 14 18:45:55 2012] Warning, spatial fit 73 centroid is now closest to src. 14
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 23:10:35 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Tue Aug 14 23:10:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 8.34"
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71.ximg exists
[Wed Aug 15 02:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71.csv
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed Aug 15 02:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71.csv
[Wed Aug 15 02:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Aug 15 02:47:01 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Aug 15 06:29:19 2012] Spatial fit model total counts = 293.944000, observed total counts = 295.000000
[Wed Aug 15 06:29:19 2012] Offset between fit and detection position for source 74 = 0.823749 pixels
[Wed Aug 15 06:29:19 2012] 284.872400 total counts/ 226.054000 bgd. counts: snr = 3.912074
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.823749 pixels
  Position = (263.1, 336.9) = 16 54 27.72 -41 48 14.2
  Extent = 6.8 (4.8-10.0)", rotation angle = 0
  Source counts = 58.8 +/- 16.9
  Background counts = 226.1
  Rate = 0.002 +/- 0.0005
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:15 2012] XMMSAS src. selection expression = ellipse(22837.330600, 29258.315160, 410.164812, 410.164812, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74_src.reg
[Wed Aug 15 13:41:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (239, 313) - (287, 360)
[Wed Aug 15 13:41:15 2012] XMMSAS bgd. selection expression = annulus(22837.330600, 29258.315160, 683.608020, 1367.216039, X, Y) && !ellipse(25690.847035, 26907.411578, 1494.488043, 1294.929503, 130.173719, X, Y) && !ellipse(23093.104370, 28383.299000, 405.694412, 405.694412, 0.000000, X, Y) && !ellipse(23664.352539, 30408.695129, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74.gif
[Wed Aug 15 14:10:56 2012] Mean detx,y = (2313.43, -3955.27) 
[Wed Aug 15 14:10:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:11:09 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:11:09 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Aug 15 14:11:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Wed Aug 15 15:19:29 2012] Not generating rmf since there are only 58 counts
[Wed Aug 15 15:19:29 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:36 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:36 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Aug 15 17:44:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:41 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src74.arf
[Wed Aug 15 17:44:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:41 2012] Updating source flux to 3e-14
[Wed Aug 15 17:44:55 2012] Flag b found in src. 74 procflags, skipping spectral fitting
[Wed Aug 15 17:44:55 2012] Source 74 has fewer than 100.000000 counts, skipping spectral fitting