[Tue Aug 14 04:27:39 2012] Detection parameters:
  Position = (332.8, 339.9) = 16 54 0.59 -41 47 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 16.1
  Background counts = 29.8
  Rate = 0.003 +/- 0.0006

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 3.90'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Tue Aug 14 08:30:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.849
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.38"
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61.csv
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61.csv
[Tue Aug 14 13:41:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Aug 14 13:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Aug 14 13:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Aug 14 13:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:45:55 2012] Warning, spatial fit 61 centroid is now closest to src. 37
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:56 2012] Source is confused with source 2
[Tue Aug 14 23:10:35 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Tue Aug 14 23:10:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.849
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.38"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59.csv
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59.csv
[Wed Aug 15 02:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Aug 15 02:47:01 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Wed Aug 15 06:29:19 2012] Source 72 is offset by -2.180334 and 0.372123 pixels which is larger than
2 X fitted extent = 1.079480 x 1.079480, not incorporating fit results
[Wed Aug 15 06:29:19 2012] Source 72 is offset by 3.699962 and 6.671295 pixels which is larger than
2 X fitted extent = 3.350966 x 3.350966, not incorporating fit results
[Wed Aug 15 06:29:19 2012] Warning, spatial fit 59 centroid is now closest to src. 37
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:15 2012] XMMSAS src. selection expression = ellipse(28905.454712, 29522.828674, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72_src.reg
[Wed Aug 15 13:41:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (295, 302) - (370, 377)
[Wed Aug 15 13:41:15 2012] XMMSAS bgd. selection expression = annulus(28905.454712, 29522.828674, 1087.500000, 2175.000000, X, Y) && !ellipse(26776.610000, 27730.372000, 357.823210, 357.823210, 0.000000, X, Y) && !ellipse(28594.572000, 29067.918600, 392.056011, 392.056011, 0.000000, X, Y) && !ellipse(28211.026820, 30138.115200, 406.644012, 357.415210, 350.219340, X, Y) && !ellipse(29394.788000, 31071.978000, 934.568027, 934.568027, 0.000000, X, Y) && !ellipse(25690.847035, 26907.411578, 1494.488043, 1294.929503, 130.173719, X, Y) && !ellipse(27434.621582, 27166.787537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.408000, 30706.286000, 374.412811, 348.952810, 101.369000, X, Y) && !ellipse(30149.228000, 32058.900000, 1476.608042, 1476.608042, 0.000000, X, Y) && !ellipse(29026.874512, 29956.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.214355, 29091.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.113037, 28259.231201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27024.582000, 31743.082000, 1468.240042, 1468.240042, 0.000000, X, Y) && !ellipse(30910.487701, 29118.597809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.410000, 28665.274000, 592.491217, 592.491217, 0.000000, X, Y) && !ellipse(28686.478516, 27283.314117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.198822, 29092.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.604279, 31051.204254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.698000, 30328.614200, 418.888012, 418.888012, 0.000000, X, Y) && !ellipse(26999.393250, 30387.959351, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72.gif
[Wed Aug 15 14:07:09 2012] Mean detx,y = (1506.35, 1856.25) 
[Wed Aug 15 14:07:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:07:21 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:07:22 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Wed Aug 15 14:07:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Wed Aug 15 15:18:21 2012] Not generating rmf since there are only 67 counts
[Wed Aug 15 15:18:21 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:35 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:35 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Wed Aug 15 17:44:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:41 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src72.arf
[Wed Aug 15 17:44:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:41 2012] Updating source flux to 3.7e-14
[Wed Aug 15 17:44:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting