[Tue Aug 14 04:27:39 2012] Detection parameters:
  Position = (331.1, 377.3) = 16 54 1.26 -41 45 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.9 +/- 13.7
  Background counts = 24.6
  Rate = 0.003 +/- 0.0005

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 6.19'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Tue Aug 14 08:30:50 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.037
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.52"
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45.csv
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45.csv
[Tue Aug 14 13:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Aug 14 13:41:56 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Aug 14 18:45:55 2012] Spatial fit model total counts = 446.934000, observed total counts = 433.000000
[Tue Aug 14 18:45:55 2012] Offset between fit and detection position for source 63 = 0.186627 pixels
[Tue Aug 14 18:45:55 2012] 411.279400 total counts/ 358.688000 bgd. counts: snr = 2.776875
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.186627 pixels
  Position = (331.1, 377.4) = 16 54 1.26 -41 45 17.7
  Extent = 5.4 (3.6-7.3)", rotation angle = 0
  Source counts = 52.6 +/- 20.3
  Background counts = 358.7
  Rate = 0.002 +/- 0.0007
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:56 2012] Source is confused with source 34
[Tue Aug 14 23:10:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Tue Aug 14 23:10:35 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.981
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 5.43"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43.csv
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43.csv
[Wed Aug 15 02:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed Aug 15 02:47:01 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed Aug 15 02:47:01 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Wed Aug 15 06:29:19 2012] Warning, spatial fit 43 centroid is now closest to src. 34
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:14 2012] XMMSAS src. selection expression = ellipse(28758.152000, 32789.243200, 325.959009, 325.959009, 0.000000, X, Y)
[Wed Aug 15 13:41:14 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63_src.reg
[Wed Aug 15 13:41:14 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (312, 359) - (350, 396)
[Wed Aug 15 13:41:14 2012] XMMSAS bgd. selection expression = annulus(28758.152000, 32789.243200, 543.265016, 1086.530031, X, Y) && !ellipse(27712.280000, 32970.422000, 402.116012, 402.116012, 0.000000, X, Y) && !ellipse(29394.788000, 31071.978000, 934.568027, 934.568027, 0.000000, X, Y) && !ellipse(28510.766800, 34823.099800, 1053.928030, 639.372818, 0.000000, X, Y) && !ellipse(30149.228000, 32058.900000, 1476.608042, 1476.608042, 0.000000, X, Y) && !ellipse(29529.246420, 32375.760600, 464.561613, 464.561613, 0.000000, X, Y) && !ellipse(28313.888000, 32402.888000, 451.039213, 451.039213, 0.000000, X, Y) && !ellipse(27024.582000, 31743.082000, 1468.240042, 1468.240042, 0.000000, X, Y) && !ellipse(29804.956000, 34335.788000, 619.894418, 277.896808, 346.679000, X, Y) && !ellipse(27629.604279, 31051.204254, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:41:14 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63.gif
[Wed Aug 15 14:02:40 2012] Mean detx,y = (4994.07, 2390.59) 
[Wed Aug 15 14:02:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:02:51 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:02:51 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Aug 15 14:02:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Wed Aug 15 15:13:12 2012] Not generating rmf since there are only 52 counts
[Wed Aug 15 15:13:12 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:34 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:34 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Aug 15 17:44:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:40 2012] Using photon index=1.80, rate=0.0017, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src63.arf
[Wed Aug 15 17:44:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:40 2012] Updating source flux to 2.9e-14
[Wed Aug 15 17:44:55 2012] Flag c found in src. 63 procflags, skipping spectral fitting
[Wed Aug 15 17:44:55 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting