[Tue Aug 14 04:27:38 2012] Detection parameters:
  Position = (247.6, 481.7) = 16 54 33.69 -41 37 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 10.0
  Background counts = 9.1
  Rate = 0.002 +/- 0.0003

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 13.79'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Tue Aug 14 08:30:50 2012] source mask rpix=3.1, npix_max = 50, mask sum = 48, frac = 0.945
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 13.32"
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87.csv
[Tue Aug 14 13:41:54 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87_1.ximg exists
[Tue Aug 14 13:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87.csv
[Tue Aug 14 13:41:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Tue Aug 14 13:41:57 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Tue Aug 14 13:41:57 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Tue Aug 14 18:45:55 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 17.507135 pixels away
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 23:10:35 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Tue Aug 14 23:10:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 48, frac = 0.945
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 13.32"
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83.ximg exists
[Wed Aug 15 02:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83.csv
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83_1.ximg exists
[Wed Aug 15 02:47:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83.csv
[Wed Aug 15 02:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:02 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Wed Aug 15 02:47:02 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Wed Aug 15 02:47:02 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Wed Aug 15 06:29:19 2012] Spatial fit model total counts = 142.002000, observed total counts = 140.000000
[Wed Aug 15 06:29:19 2012] Offset between fit and detection position for source 50 = 0.508684 pixels
[Wed Aug 15 06:29:19 2012] 142.917000 total counts/ 102.165000 bgd. counts: snr = 4.031790
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.508684 pixels
  Position = (247.1, 481.5) = 16 54 33.86 -41 37 45.1
  Extent = 6.2 (4.7-8.1)", rotation angle = 0
  Source counts = 40.8 +/- 12.0
  Background counts = 102.2
  Rate = 0.001 +/- 0.0004
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:15 2012] XMMSAS src. selection expression = ellipse(21452.255940, 41839.511600, 374.102411, 374.102411, 0.000000, X, Y)
[Wed Aug 15 13:41:15 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50_src.reg
[Wed Aug 15 13:41:15 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (226, 460) - (269, 503)
[Wed Aug 15 13:41:15 2012] XMMSAS bgd. selection expression = annulus(21452.255940, 41839.511600, 623.504018, 1247.008036, X, Y)
[Wed Aug 15 13:41:15 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50.gif
[Wed Aug 15 14:13:45 2012] Mean detx,y = (14981.21, -3592.62) 
[Wed Aug 15 14:13:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:13:59 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:13:59 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Aug 15 14:13:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Aug 15 15:20:36 2012] Not generating rmf since there are only 40 counts
[Wed Aug 15 15:20:36 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:37 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:37 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Aug 15 17:44:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:42 2012] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src50.arf
[Wed Aug 15 17:44:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:42 2012] Updating source flux to 4.7e-14
[Wed Aug 15 17:44:55 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting