[Tue Aug 14 04:27:37 2012] Detection parameters:
  Position = (315.9, 312.8) = 16 54 7.16 -41 50 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.2 +/- 22.5
  Background counts = 38.9
  Rate = 0.008 +/- 0.0007

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 1.64'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Aug 14 08:30:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.25"
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 13:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 14 13:41:56 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 14 13:41:56 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Aug 14 18:45:55 2012] Warning, spatial fit 16 centroid is now closest to src. 1
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 23:10:35 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Aug 14 23:10:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.25"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15.csv
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15.csv
[Wed Aug 15 02:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Aug 15 02:47:00 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Aug 15 06:29:19 2012] Warning, spatial fit 15 centroid is now closest to src. 1
[Wed Aug 15 06:29:19 2012] Source 20 is offset by 7.783393 and -5.669224 pixels which is larger than
2 X fitted extent = 2.985145 x 2.985145, not incorporating fit results
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:13 2012] XMMSAS src. selection expression = ellipse(27434.621582, 27166.787537, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 13:41:13 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20_src.reg
[Wed Aug 15 13:41:13 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (278, 275) - (353, 350)
[Wed Aug 15 13:41:13 2012] XMMSAS bgd. selection expression = annulus(27434.621582, 27166.787537, 1087.500000, 2175.000000, X, Y) && !ellipse(26776.610000, 27730.372000, 357.823210, 357.823210, 0.000000, X, Y) && !ellipse(28594.572000, 29067.918600, 392.056011, 392.056011, 0.000000, X, Y) && !ellipse(26409.107600, 25982.926400, 368.997611, 316.572009, 231.674000, X, Y) && !ellipse(25787.935960, 26802.492000, 799.854423, 799.854423, 0.000000, X, Y) && !ellipse(25690.847035, 26907.411578, 1494.488043, 1294.929503, 130.173719, X, Y) && !ellipse(25130.018000, 28898.958000, 291.787208, 291.787208, 0.000000, X, Y) && !ellipse(27521.247400, 25780.752140, 354.535210, 354.535210, 0.000000, X, Y) && !ellipse(27034.973000, 24926.122200, 396.379211, 278.577608, 54.056100, X, Y) && !ellipse(29911.976000, 25461.738400, 404.460012, 404.460012, 0.000000, X, Y) && !ellipse(29026.874512, 29956.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.214355, 29091.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.113037, 28259.231201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.454712, 29522.828674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.248580, 28445.024000, 274.796808, 274.796808, 0.000000, X, Y) && !ellipse(27068.410000, 28665.274000, 592.491217, 592.491217, 0.000000, X, Y) && !ellipse(28686.478516, 27283.314117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.198822, 29092.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28637.232000, 25697.466200, 422.869612, 422.869612, 0.000000, X, Y)
[Wed Aug 15 13:41:13 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20.gif
[Wed Aug 15 13:53:50 2012] Mean detx,y = (-296.11, 182.52) 
[Wed Aug 15 13:53:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 13:54:01 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 13:54:02 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 15 13:54:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Aug 15 15:02:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 15:02:03 2012] rmf not generated due to insufficient counts
[Wed Aug 15 17:44:33 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:33 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 15 17:44:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:38 2012] Using photon index=1.80, rate=0.00835, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src20.arf
[Wed Aug 15 17:44:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:38 2012] Updating source flux to 9.8e-14
[Wed Aug 15 17:44:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting