[Tue Aug 14 04:27:37 2012] Detection parameters:
  Position = (337.6, 357.9) = 16 53 58.71 -41 46 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 329.3 +/- 23.4
  Background counts = 29.3
  Rate = 0.01 +/- 0.0008

[Tue Aug 14 04:27:39 2012] Off-axis axis estimate = 5.17'
[Tue Aug 14 08:30:50 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 08:30:50 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Aug 14 08:30:50 2012] source mask rpix=2.1, npix_max = 26, mask sum = 27, frac = 1.021
[Tue Aug 14 08:30:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.01"
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10.csv
[Tue Aug 14 13:41:53 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Aug 14 13:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10.csv
[Tue Aug 14 13:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 13:41:55 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Aug 14 13:41:55 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Aug 14 13:41:55 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Aug 14 18:45:55 2012] Spatial fit model total counts = 788.265000, observed total counts = 747.000000
[Tue Aug 14 18:45:55 2012] Offset between fit and detection position for source 12 = 0.456743 pixels
[Tue Aug 14 18:45:55 2012] 782.089000 total counts/ 483.867000 bgd. counts: snr = 13.557408
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.456743 pixels
  Position = (338.1, 357.8) = 16 53 58.55 -41 46 43.2
  Extent = 7.7 (6.7-8.9)", rotation angle = 0
  Source counts = 298.2 +/- 28.0
  Background counts = 483.9
  Rate = 0.01 +/- 0.0009
[Tue Aug 14 18:45:55 2012] Spatial fit model total counts = 711.333000, observed total counts = 674.000000
[Tue Aug 14 18:45:55 2012] Offset between fit and detection position for source 12 = 0.369579 pixels
[Tue Aug 14 18:45:55 2012] Warning, changing simple spatial fit ID from 10 to 34
[Tue Aug 14 18:45:55 2012] 719.473000 total counts/ 284.290000 bgd. counts: snr = 25.810186
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.369579 pixels
  Position = (338.4, 357.7) = 16 53 58.41 -41 46 43.5
  Extent = 11.7 (8.9-14.5)", rotation angle = 0
  Source counts = 435.2 +/- 26.8
  Background counts = 284.3
  Rate = 0.01 +/- 0.0009
[Tue Aug 14 18:45:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:45:55 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:45:55 2012] Source does appear to be extended
[Tue Aug 14 18:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:45:56 2012] Source is confused with source 35
[Tue Aug 14 23:10:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 23:10:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 23:10:35 2012] Initial guess for spatial extent in simple fitting = 11.68"
[Tue Aug 14 23:10:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 37, frac = 0.912
[Tue Aug 14 23:10:35 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.68"
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 02:46:59 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 15 02:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 02:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 15 02:47:00 2012] fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 15 02:47:00 2012] Fit fullrun_mos1_xmm0109490501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Aug 15 06:29:19 2012] Warning, spatial fit 10 centroid is now closest to src. 75
[Wed Aug 15 06:29:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 06:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 06:29:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 06:29:19 2012] Source does appear to be extended
[Wed Aug 15 06:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:41:13 2012] XMMSAS src. selection expression = ellipse(29394.788000, 31071.978000, 700.926020, 700.926020, 0.000000, X, Y)
[Wed Aug 15 13:41:13 2012] Writing source region out to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12_src.reg
[Wed Aug 15 13:41:13 2012] Extracting stamp from image fullrun_mos1_xmm0109490501_pi300-10000_cl_sm2.00.img.gz, (298, 317) - (379, 398)
[Wed Aug 15 13:41:13 2012] XMMSAS bgd. selection expression = annulus(29394.788000, 31071.978000, 1168.210034, 2336.420067, X, Y) && !ellipse(28594.572000, 29067.918600, 392.056011, 392.056011, 0.000000, X, Y) && !ellipse(28211.026820, 30138.115200, 406.644012, 357.415210, 350.219340, X, Y) && !ellipse(27712.280000, 32970.422000, 402.116012, 402.116012, 0.000000, X, Y) && !ellipse(27450.408000, 30706.286000, 374.412811, 348.952810, 101.369000, X, Y) && !ellipse(30149.228000, 32058.900000, 1476.608042, 1476.608042, 0.000000, X, Y) && !ellipse(29529.246420, 32375.760600, 464.561613, 464.561613, 0.000000, X, Y) && !ellipse(28313.888000, 32402.888000, 451.039213, 451.039213, 0.000000, X, Y) && !ellipse(29026.874512, 29956.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28758.152000, 32789.243200, 434.612013, 434.612013, 0.000000, X, Y) && !ellipse(27722.214355, 29091.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.113037, 28259.231201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27024.582000, 31743.082000, 1468.240042, 1468.240042, 0.000000, X, Y) && !ellipse(30910.487701, 29118.597809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.454712, 29522.828674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.410000, 28665.274000, 592.491217, 592.491217, 0.000000, X, Y) && !ellipse(27279.198822, 29092.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.604279, 31051.204254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.393250, 30387.959351, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:41:13 2012] Writing fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12.gif
[Wed Aug 15 13:45:11 2012] Mean detx,y = (3266.15, 2800.16) 
[Wed Aug 15 13:45:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 13:45:32 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 13:45:33 2012] Setting source spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug 15 13:45:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Aug 15 17:44:32 2012] Updating aperture counts using extracted products
[Wed Aug 15 17:44:32 2012] Error reading totcts from fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug 15 17:44:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 17:44:38 2012] Using photon index=1.80, rate=0.0141, arf fullrun_mos1_xmm0109490501_pi300-10000_pass1_cl_src12.arf
[Wed Aug 15 17:44:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 17:44:38 2012] Updating source flux to 1.8e-13
[Wed Aug 15 17:44:55 2012] Flag c found in src. 12 procflags, skipping spectral fitting