[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (320.5, 176.1) = 16 54 5.66 -41 59 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.8 +/- 18.1
  Background counts = 66.1
  Rate = 0.005 +/- 0.0006

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 9.01'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Thu Jul 19 19:49:40 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 10.93"
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80.ximg exists
[Thu Jul 19 23:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80.csv
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80_1.ximg exists
[Thu Jul 19 23:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80.csv
[Thu Jul 19 23:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:11 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Thu Jul 19 23:51:11 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Thu Jul 19 23:51:11 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Fri Jul 20 06:25:43 2012] Warning: source 80 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 13.274995 pixels away
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:40 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Fri Jul 20 06:26:40 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 10.93"
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79.csv
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79_1.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79.csv
[Fri Jul 20 11:42:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Fri Jul 20 11:42:07 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 1042.850000, observed total counts = 1042.000000
[Fri Jul 20 18:24:11 2012] Offset between fit and detection position for source 92 = 0.168537 pixels
[Fri Jul 20 18:24:11 2012] 1048.593000 total counts/ 983.080000 bgd. counts: snr = 2.089455
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.168537 pixels
  Position = (320.7, 176.1) = 16 54 5.60 -41 59 52.1
  Extent = 4.0 (2.9-5.2)", rotation angle = 0
  Source counts = 65.5 +/- 32.4
  Background counts = 983.1
  Rate = 0.002 +/- 0.001
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(27852.407600, 15268.965200, 242.448607, 242.448607, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (307, 162) - (335, 190)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(27852.407600, 15268.965200, 404.081012, 808.162023, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92.gif
[Fri Jul 20 19:24:56 2012] Mean detx,y = (-538.21, 12286.08) 
[Fri Jul 20 19:24:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:25:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:25:12 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Fri Jul 20 19:25:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Fri Jul 20 22:41:33 2012] Not generating rmf since there are only 65 counts
[Fri Jul 20 22:41:33 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:15 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:15 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sat Jul 21 02:37:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:17 2012] Using photon index=1.80, rate=0.0024, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src92.arf
[Sat Jul 21 02:37:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:17 2012] Updating source flux to 2.9e-14
[Sat Jul 21 02:42:33 2012] Source 92 has fewer than 100.000000 counts, skipping spectral fitting