[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (376.1, 303.5) = 16 53 44.06 -41 50 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.9 +/- 16.3
  Background counts = 80.0
  Rate = 0.004 +/- 0.0007

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 5.64'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Thu Jul 19 19:49:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 9.25"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Thu Jul 19 23:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 758.294000, observed total counts = 757.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 86 = 0.142591 pixels
[Fri Jul 20 06:25:43 2012] Warning, changing simple spatial fit ID from 74 to 67
[Fri Jul 20 06:25:43 2012] 733.964200 total counts/ 699.917000 bgd. counts: snr = 1.286939
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.142591 pixels
  Position = (376.0, 303.7) = 16 53 44.09 -41 50 36.9
  Extent = 2.6 (2.4-5.2)", rotation angle = 0
  Source counts = 34.0 +/- 27.1
  Background counts = 699.9
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability