[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (316.7, 313.2) = 16 54 7.17 -41 49 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.3 +/- 25.8
  Background counts = 138.1
  Rate = 0.008 +/- 0.001

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 1.70'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 7.28"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu Jul 19 23:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:43 2012] Warning, spatial fit 71 centroid is now closest to src. 78
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.28"
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71.csv
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71_1.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71.csv
[Fri Jul 20 11:42:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Fri Jul 20 11:42:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Jul 20 11:42:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Fri Jul 20 11:42:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:11 2012] Source 83 is offset by 7.407449 and -5.809170 pixels which is larger than
2 X fitted extent = 2.053977 x 2.053977, not incorporating fit results
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(27505.540070, 27199.338196, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (279, 276) - (354, 351)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(27505.540070, 27199.338196, 1087.500000, 2175.000000, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(28704.115875, 29236.390839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.528200, 26735.513200, 622.540818, 622.540818, 0.000000, X, Y) && !ellipse(26507.247800, 25954.661400, 411.338412, 411.338412, 0.000000, X, Y) && !ellipse(29114.371002, 29882.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25039.658000, 28098.188000, 992.144029, 992.144029, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25917.760000, 26835.594000, 655.457619, 655.457619, 0.000000, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.147200, 24902.280260, 423.682412, 423.682412, 0.000000, X, Y) && !ellipse(26810.628632, 29699.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.275909, 28923.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29211.675171, 28282.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.640000, 27245.614000, 367.481611, 367.481611, 0.000000, X, Y) && !ellipse(29075.233215, 26852.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y) && !ellipse(25793.686035, 25797.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.932007, 25625.248322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.931152, 24929.720917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.198944, 24335.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.941872, 24460.904000, 1051.704338, 740.465982, 345.446999, X, Y) && !ellipse(26740.243600, 24020.278400, 1175.264034, 316.109609, 15.423900, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83.gif
[Fri Jul 20 19:20:06 2012] Mean detx,y = (518.52, 289.38) 
[Fri Jul 20 19:20:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:20:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:20:26 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Fri Jul 20 19:20:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Fri Jul 20 22:34:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 22:34:24 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:15 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:15 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Jul 21 02:37:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:17 2012] Using photon index=1.80, rate=0.00773, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src83.arf
[Sat Jul 21 02:37:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:17 2012] Updating source flux to 2.5e-14
[Sat Jul 21 02:42:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting