[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (331.4, 313.8) = 16 54 1.44 -41 49 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 295.6 +/- 27.0
  Background counts = 129.3
  Rate = 0.01 +/- 0.001

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 2.64'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 7.75"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Thu Jul 19 23:51:10 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Jul 20 06:25:43 2012] Source 77 is offset by 1.474037 and -7.195375 pixels which is larger than
2 X fitted extent = 6.401425 x 6.401425, not incorporating fit results
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 1537.230000, observed total counts = 1544.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 77 = 0.073863 pixels
[Fri Jul 20 06:25:43 2012] 1530.003000 total counts/ 1355.800000 bgd. counts: snr = 4.731053
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.073863 pixels
  Position = (331.4, 313.8) = 16 54 1.47 -41 49 53.1
  Extent = 4.9 (4.2-5.7)", rotation angle = 0
  Source counts = 174.2 +/- 39.1
  Background counts = 1355.8
  Rate = 0.006 +/- 0.001
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 1474.240000, observed total counts = 1476.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 77 = 0.068127 pixels
[Fri Jul 20 06:25:43 2012] Warning, changing simple spatial fit ID from 65 to 69
[Fri Jul 20 06:25:43 2012] 1478.321000 total counts/ 1322.700000 bgd. counts: snr = 4.278953
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.068127 pixels
  Position = (331.4, 313.7) = 16 54 1.46 -41 49 53.4
  Extent = 4.7 (3.9-5.4)", rotation angle = 0
  Source counts = 155.6 +/- 38.4
  Background counts = 1322.7
  Rate = 0.006 +/- 0.001
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:25:43 2012] Source is confused with source 81
[Fri Jul 20 06:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 4.66"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.911
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 4.66"
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65.csv
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri Jul 20 11:42:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65.csv
[Fri Jul 20 11:42:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri Jul 20 11:42:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri Jul 20 11:42:07 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 1510.300000, observed total counts = 1512.000000
[Fri Jul 20 18:24:11 2012] Offset between fit and detection position for source 77 = 0.067976 pixels
[Fri Jul 20 18:24:11 2012] 1493.262000 total counts/ 1310.480000 bgd. counts: snr = 5.049149
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.067976 pixels
  Position = (331.4, 313.8) = 16 54 1.47 -41 49 53.1
  Extent = 5.1 (4.4-5.9)", rotation angle = 0
  Source counts = 182.8 +/- 38.6
  Background counts = 1310.5
  Rate = 0.007 +/- 0.001
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 1473.740000, observed total counts = 1476.000000
[Fri Jul 20 18:24:11 2012] Offset between fit and detection position for source 77 = 0.046984 pixels
[Fri Jul 20 18:24:11 2012] Warning, changing simple spatial fit ID from 65 to 69
[Fri Jul 20 18:24:11 2012] 1477.645000 total counts/ 1322.780000 bgd. counts: snr = 4.258037
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.046984 pixels
  Position = (331.4, 313.7) = 16 54 1.46 -41 49 53.2
  Extent = 4.6 (3.9-5.3)", rotation angle = 0
  Source counts = 154.9 +/- 38.4
  Background counts = 1322.8
  Rate = 0.006 +/- 0.001
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(28783.640000, 27245.614000, 275.611208, 275.611208, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (316, 298) - (347, 330)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(28783.640000, 27245.614000, 459.352013, 918.704026, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29211.675171, 28282.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.233215, 26852.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77.gif
[Fri Jul 20 19:17:24 2012] Mean detx,y = (1954.76, 533.56) 
[Fri Jul 20 19:17:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:17:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:17:38 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Jul 20 19:17:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sat Jul 21 02:37:15 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:15 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.00567, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src77.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 2.4e-14
[Sat Jul 21 02:42:33 2012] Flag b found in src. 77 procflags, skipping spectral fitting
[Sat Jul 21 02:42:33 2012] Flag c found in src. 77 procflags, skipping spectral fitting