[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (336.3, 325.6) = 16 53 59.55 -41 49 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 19.7
  Background counts = 126.9
  Rate = 0.004 +/- 0.0008

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 3.38'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.12"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 19 23:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:43 2012] Warning, spatial fit 61 centroid is now closest to src. 77
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:40 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 8.12"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src61.ximg exists
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Jul 20 11:42:03 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src61 appears to have run properly
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jul 20 11:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:11 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 11.346844 pixels away
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(29211.675171, 28282.993713, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (299, 288) - (374, 363)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(29211.675171, 28282.993713, 1087.500000, 2175.000000, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(28704.115875, 29236.390839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.394786, 30112.463600, 440.276013, 440.276013, 0.000000, X, Y) && !ellipse(29707.039917, 31174.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.827057, 31014.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29114.371002, 29882.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.736023, 26412.047668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.590515, 30632.867218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.338593, 30330.002716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.628632, 29699.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32046.006561, 28205.705811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.640000, 27245.614000, 367.481611, 367.481611, 0.000000, X, Y) && !ellipse(31490.452301, 26819.995575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.233215, 26852.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73.gif
[Fri Jul 20 19:15:29 2012] Mean detx,y = (2452.14, -475.00) 
[Fri Jul 20 19:15:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:15:56 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:15:56 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Jul 20 19:15:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Fri Jul 20 22:26:07 2012] Not generating rmf since there are only 88 counts
[Fri Jul 20 22:26:07 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:15 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:15 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.00355, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src73.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 1.2e-14
[Sat Jul 21 02:42:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting