[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (290.6, 333.0) = 16 54 17.33 -41 48 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.4 +/- 25.1
  Background counts = 128.8
  Rate = 0.01 +/- 0.001

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 2.57'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 7.71"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu Jul 19 23:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:43 2012] Warning, spatial fit 59 centroid is now closest to src. 63
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:25:43 2012] Source is confused with source 72
[Fri Jul 20 06:26:40 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 7.71"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59.csv
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59.csv
[Fri Jul 20 11:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Jul 20 11:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 1705.540000, observed total counts = 1279.000000
[Fri Jul 20 18:24:11 2012] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(25236.275909, 28923.230133, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (253, 296) - (328, 371)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(25236.275909, 28923.230133, 1087.500000, 2175.000000, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(25774.528200, 26735.513200, 622.540818, 622.540818, 0.000000, X, Y) && !ellipse(25039.658000, 28098.188000, 992.144029, 992.144029, 0.000000, X, Y) && !ellipse(23154.833832, 27661.005310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.522000, 27204.836000, 392.259211, 392.259211, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.503510, 26812.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25917.760000, 26835.594000, 655.457619, 655.457619, 0.000000, X, Y) && !ellipse(27284.025665, 31361.478943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.648651, 31035.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.590515, 30632.867218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.338593, 30330.002716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.628632, 29699.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22932.953033, 29209.755585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y) && !ellipse(22670.442322, 26141.348846, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70.gif
[Fri Jul 20 19:13:24 2012] Mean detx,y = (-1406.09, -1644.32) 
[Fri Jul 20 19:13:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:13:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:13:50 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Fri Jul 20 19:13:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Fri Jul 20 22:25:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 22:25:17 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:15 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.0116, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src70.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 4.6e-14
[Sat Jul 21 02:42:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting