[Thu Jul 19 19:45:30 2012] Detection parameters:
  Position = (308.7, 341.9) = 16 54 10.29 -41 47 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.0 +/- 19.1
  Background counts = 130.5
  Rate = 0.006 +/- 0.0009

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 3.24'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.769
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.05"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55.csv
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Jul 19 23:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Jul 19 23:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:43 2012] Warning, spatial fit 55 centroid is now closest to src. 63
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:40 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.769
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 8.05"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55.csv
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55.csv
[Fri Jul 20 11:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jul 20 11:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:11 2012] Warning, spatial fit 55 centroid is now closest to src. 63
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:05 2012] XMMSAS src. selection expression = ellipse(26810.628632, 29699.892578, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66_src.reg
[Fri Jul 20 18:25:05 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (271, 304) - (346, 379)
[Fri Jul 20 18:25:05 2012] XMMSAS bgd. selection expression = annulus(26810.628632, 29699.892578, 1087.500000, 2175.000000, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(28704.115875, 29236.390839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.394786, 30112.463600, 440.276013, 440.276013, 0.000000, X, Y) && !ellipse(27722.962240, 32309.014920, 449.086413, 449.086413, 0.000000, X, Y) && !ellipse(29707.039917, 31174.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.827057, 31014.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29114.371002, 29882.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25039.658000, 28098.188000, 992.144029, 992.144029, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.503510, 26812.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.946808, 32683.399445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.025665, 31361.478943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.648651, 31035.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.590515, 30632.867218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.338593, 30330.002716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.275909, 28923.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29211.675171, 28282.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.640000, 27245.614000, 367.481611, 367.481611, 0.000000, X, Y) && !ellipse(29075.233215, 26852.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y)
[Fri Jul 20 18:25:05 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66.gif
[Fri Jul 20 19:10:47 2012] Mean detx,y = (274.16, -2122.54) 
[Fri Jul 20 19:10:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:11:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:11:05 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Jul 20 19:11:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Fri Jul 20 22:14:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 22:14:21 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:14 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.00636, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src66.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 2.6e-14
[Sat Jul 21 02:42:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting