[Thu Jul 19 19:45:29 2012] Detection parameters:
  Position = (285.0, 423.9) = 16 54 19.49 -41 41 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.5 +/- 16.1
  Background counts = 69.8
  Rate = 0.006 +/- 0.001

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 9.15'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Thu Jul 19 19:49:40 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.980
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 11.00"
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src38.ximg exists
[Thu Jul 19 23:51:08 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Jul 19 23:51:08 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src38 appears to have run properly
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Jul 19 23:51:10 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Jul 19 23:51:10 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 729.782000, observed total counts = 728.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 49 = 6.450870 pixels
[Fri Jul 20 06:25:43 2012] 732.395000 total counts/ 490.359000 bgd. counts: snr = 10.930069
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 6.450870 pixels
  Position = (278.9, 425.8) = 16 54 21.89 -41 41 45.6
  Extent = 22.0 (22.0-44.0)", rotation angle = 0
  Source counts = 242.0 +/- 27.1
  Background counts = 490.4
  Rate = 0.009 +/- 0.001
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 22.01"
[Fri Jul 20 06:26:40 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.979
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 22.01"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38.csv
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38.csv
[Fri Jul 20 11:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Jul 20 11:42:06 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Jul 20 11:42:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Jul 20 11:42:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:11 2012] Warning, spatial fit 38 centroid is now closest to src. 53
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:04 2012] XMMSAS src. selection expression = ellipse(24213.050000, 36999.595400, 1320.498038, 1320.498038, 0.000000, X, Y)
[Fri Jul 20 18:25:04 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49_src.reg
[Fri Jul 20 18:25:04 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (203, 350) - (355, 502)
[Fri Jul 20 18:25:04 2012] XMMSAS bgd. selection expression = annulus(24213.050000, 36999.595400, 2200.830063, 4401.660127, X, Y) && !ellipse(26537.439482, 40909.993048, 584.286931, 355.551972, 354.783553, X, Y) && !ellipse(26719.648743, 39959.520508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.997345, 34799.200256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.962240, 32309.014920, 449.086413, 449.086413, 0.000000, X, Y) && !ellipse(28397.475922, 41090.005432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23560.485138, 40708.642334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25590.176800, 37996.521600, 1833.728053, 1833.728053, 0.000000, X, Y) && !ellipse(22451.030701, 36096.776794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.853717, 35943.557331, 1267.606326, 406.631075, 325.228106, X, Y) && !ellipse(23800.210388, 35680.858490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.215800, 33788.557400, 470.680814, 470.680814, 0.000000, X, Y) && !ellipse(20299.624619, 33263.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.400757, 32922.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.946808, 32683.399445, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:04 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49.gif
[Fri Jul 20 19:00:41 2012] Mean detx,y = (-1089.05, -9758.22) 
[Fri Jul 20 19:00:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 19:01:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 19:01:30 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jul 20 19:01:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:14 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.00887, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src49.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 4.9e-14