[Thu Jul 19 19:45:29 2012] Detection parameters:
  Position = (301.2, 305.1) = 16 54 13.21 -41 50 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1036.5 +/- 46.3
  Background counts = 135.0
  Rate = 0.04 +/- 0.002

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 0.52'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.963
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 6.69"
[Thu Jul 19 23:51:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul 19 23:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22.csv
[Thu Jul 19 23:51:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul 19 23:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22.csv
[Thu Jul 19 23:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul 19 23:51:09 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 6855.200000, observed total counts = 6868.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 32 = 4.596126 pixels
[Fri Jul 20 06:25:43 2012] 5133.340000 total counts/ 1797.410000 bgd. counts: snr = 78.685254
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.596126 pixels
  Position = (297.6, 307.9) = 16 54 14.62 -41 50 18.5
  Extent = 13.4 (13.3-13.4)", rotation angle = 0
  Source counts = 3335.9 +/- 71.6
  Background counts = 1797.4
  Rate = 0.1 +/- 0.003
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 3874.380000, observed total counts = 3726.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 32 = 1.392056 pixels
[Fri Jul 20 06:25:43 2012] Warning, changing simple spatial fit ID from 22 to 64
[Fri Jul 20 06:25:43 2012] 2813.187000 total counts/ 2098.940000 bgd. counts: snr = 15.590082
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.392056 pixels
  Position = (298.5, 309.0) = 16 54 14.28 -41 50 13.7
  Extent = 8.0 (7.2-9.1)", rotation angle = 0
  Source counts = 714.2 +/- 53.0
  Background counts = 2098.9
  Rate = 0.03 +/- 0.002
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:25:43 2012] Source is confused with source 3
[Fri Jul 20 06:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.04"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23.csv
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23.csv
[Fri Jul 20 11:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:05 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jul 20 11:42:05 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jul 20 11:42:05 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jul 20 18:24:10 2012] Warning, spatial fit 23 centroid is now closest to src. 76
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 3858.350000, observed total counts = 3726.000000
[Fri Jul 20 18:24:11 2012] Offset between fit and detection position for source 32 = 0.021563 pixels
[Fri Jul 20 18:24:11 2012] Warning, changing simple spatial fit ID from 23 to 64
[Fri Jul 20 18:24:11 2012] 2727.311000 total counts/ 1979.340000 bgd. counts: snr = 16.812200
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.021563 pixels
  Position = (298.5, 309.0) = 16 54 14.28 -41 50 13.8
  Extent = 8.2 (7.3-9.2)", rotation angle = 0
  Source counts = 748.0 +/- 52.2
  Background counts = 1979.3
  Rate = 0.03 +/- 0.002
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:03 2012] XMMSAS src. selection expression = ellipse(25917.760000, 26835.594000, 491.593214, 491.593214, 0.000000, X, Y)
[Fri Jul 20 18:25:03 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32_src.reg
[Fri Jul 20 18:25:03 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (270, 281) - (327, 337)
[Fri Jul 20 18:25:04 2012] XMMSAS bgd. selection expression = annulus(25917.760000, 26835.594000, 819.322024, 1638.644047, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(25774.528200, 26735.513200, 622.540818, 622.540818, 0.000000, X, Y) && !ellipse(26507.247800, 25954.661400, 411.338412, 411.338412, 0.000000, X, Y) && !ellipse(25039.658000, 28098.188000, 992.144029, 992.144029, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.503510, 26812.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.147200, 24902.280260, 423.682412, 423.682412, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.275909, 28923.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y) && !ellipse(25793.686035, 25797.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.932007, 25625.248322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.841200, 25851.218800, 267.492808, 267.492808, 0.000000, X, Y) && !ellipse(24618.931152, 24929.720917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.941872, 24460.904000, 1051.704338, 740.465982, 345.446999, X, Y)
[Fri Jul 20 18:25:04 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32.gif
[Fri Jul 20 18:50:04 2012] Mean detx,y = (-977.12, 631.22) 
[Fri Jul 20 18:50:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 18:50:21 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 18:50:21 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jul 20 18:50:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:14 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.0274, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src32.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 9.9e-14
[Sat Jul 21 02:42:33 2012] Flag c found in src. 32 procflags, skipping spectral fitting