[Thu Jul 19 19:45:29 2012] Detection parameters:
  Position = (296.3, 307.8) = 16 54 15.11 -41 50 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2214.9 +/- 59.7
  Background counts = 134.8
  Rate = 0.09 +/- 0.002

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 0.70'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Thu Jul 19 19:49:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.78"
[Thu Jul 19 23:51:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 19 23:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 23:51:07 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 19 23:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 23:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 19 23:51:09 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 19 23:51:09 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 5043.840000, observed total counts = 5046.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 3 = 0.499069 pixels
[Fri Jul 20 06:25:43 2012] 5123.530000 total counts/ 3567.800000 bgd. counts: snr = 26.045577
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.499069 pixels
  Position = (296.8, 307.9) = 16 54 14.92 -41 50 18.8
  Extent = 7.8 (6.4-8.7)", rotation angle = 0
  Source counts = 1555.7 +/- 71.6
  Background counts = 3567.8
  Rate = 0.06 +/- 0.003
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:25:43 2012] Source is confused with source 32
[Fri Jul 20 06:25:43 2012] Source is confused with source 76
[Fri Jul 20 06:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Jul 20 06:26:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.78"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 20 11:42:03 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 11:42:04 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 11:42:05 2012] Fit fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 18:24:10 2012] Warning, spatial fit 3 centroid is now closest to src. 76
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:02 2012] Counts = 1555.730000, rescaling region sizes by 2.000000
[Fri Jul 20 18:25:02 2012] XMMSAS src. selection expression = ellipse(25774.528200, 26735.513200, 933.811227, 933.811227, 0.000000, X, Y)
[Fri Jul 20 18:25:02 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 20 18:25:02 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (243, 254) - (350, 362)
[Fri Jul 20 18:25:02 2012] XMMSAS bgd. selection expression = annulus(25774.528200, 26735.513200, 3112.704090, 6225.408179, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(28704.115875, 29236.390839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26507.247800, 25954.661400, 411.338412, 411.338412, 0.000000, X, Y) && !ellipse(28312.394786, 30112.463600, 440.276013, 440.276013, 0.000000, X, Y) && !ellipse(27722.962240, 32309.014920, 449.086413, 449.086413, 0.000000, X, Y) && !ellipse(29628.454000, 31642.898000, 529.359032, 529.359032, 0.000000, X, Y) && !ellipse(21305.143000, 31460.928800, 470.880814, 470.880814, 0.000000, X, Y) && !ellipse(29707.039917, 31174.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.827057, 31014.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29114.371002, 29882.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.737380, 29140.849600, 441.741613, 441.741613, 0.000000, X, Y) && !ellipse(25039.658000, 28098.188000, 992.144029, 992.144029, 0.000000, X, Y) && !ellipse(23154.833832, 27661.005310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.522000, 27204.836000, 392.259211, 392.259211, 0.000000, X, Y) && !ellipse(19602.532074, 27128.690521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.503510, 26812.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.736023, 26412.047668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25917.760000, 26835.594000, 655.457619, 655.457619, 0.000000, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.147200, 24902.280260, 423.682412, 423.682412, 0.000000, X, Y) && !ellipse(25824.636000, 24441.320000, 373.139211, 373.139211, 0.000000, X, Y) && !ellipse(30070.572000, 23751.434000, 283.436808, 283.436808, 0.000000, X, Y) && !ellipse(27338.220123, 20863.230255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20299.624619, 33263.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.400757, 32922.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.946808, 32683.399445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30298.678680, 32222.542114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.025665, 31361.478943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.648651, 31035.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.590515, 30632.867218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.338593, 30330.002716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32789.775848, 29773.362549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.628632, 29699.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22932.953033, 29209.755585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.275909, 28923.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29211.675171, 28282.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32046.006561, 28205.705811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.640000, 27245.614000, 367.481611, 367.481611, 0.000000, X, Y) && !ellipse(31490.452301, 26819.995575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.233215, 26852.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y) && !ellipse(22670.442322, 26141.348846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.686035, 25797.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.932007, 25625.248322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.841200, 25851.218800, 267.492808, 267.492808, 0.000000, X, Y) && !ellipse(24618.931152, 24929.720917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.818000, 24457.542000, 371.048811, 371.048811, 0.000000, X, Y) && !ellipse(29572.198944, 24335.647491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.941872, 24460.904000, 1051.704338, 740.465982, 345.446999, X, Y) && !ellipse(24267.747772, 24033.738800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.243600, 24020.278400, 1175.264034, 316.109609, 15.423900, X, Y) && !ellipse(25427.905304, 23869.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18989.204376, 23802.084839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31758.753632, 23592.464966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27570.291600, 23737.641400, 817.072024, 416.395212, 334.547400, X, Y) && !ellipse(25917.507600, 23351.371800, 1157.880033, 343.759210, 334.509000, X, Y) && !ellipse(20782.007599, 23427.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21643.459093, 22510.647572, 390.429072, 358.122412, 41.730216, X, Y) && !ellipse(21023.775081, 22674.620487, 440.523757, 336.408192, 253.544299, X, Y) && !ellipse(20187.188110, 21915.436951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24034.306976, 21826.689941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.109283, 21862.512924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.009399, 21664.628281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19324.492096, 21618.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24048.423767, 21213.979538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21991.889847, 21015.127136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21013.352249, 20493.112534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30049.172302, 20164.892502, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:02 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3.gif
[Fri Jul 20 18:28:54 2012] Mean detx,y = (-1001.48, 678.74) 
[Fri Jul 20 18:28:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 18:29:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 18:29:59 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 18:29:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:14 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 21 02:37:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:15 2012] Using photon index=1.80, rate=0.057, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src3.arf
[Sat Jul 21 02:37:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:15 2012] Updating source flux to 1.8e-13
[Sat Jul 21 02:42:33 2012] Flag c found in src. 3 procflags, skipping spectral fitting