[Thu Jul 19 19:45:29 2012] Detection parameters:
  Position = (284.7, 322.2) = 16 54 19.62 -41 49 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460.9 +/- 27.4
  Background counts = 132.6
  Rate = 0.03 +/- 0.002

[Thu Jul 19 19:45:31 2012] Off-axis axis estimate = 1.99'
[Thu Jul 19 19:49:40 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:49:40 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Thu Jul 19 19:49:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 8, frac = 0.411
[Thu Jul 19 19:49:40 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 20 06:25:43 2012] Spatial fit model total counts = 2120.890000, observed total counts = 2077.000000
[Fri Jul 20 06:25:43 2012] Offset between fit and detection position for source 25 = 3.788777 pixels
[Fri Jul 20 06:25:43 2012] Warning, changing simple spatial fit ID from -1 to 63
[Fri Jul 20 06:25:43 2012] 2116.086000 total counts/ 1860.500000 bgd. counts: snr = 5.925462
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.788777 pixels
  Position = (288.4, 323.3) = 16 54 18.21 -41 49 11.5
  Extent = 12.2 (8.1-14.4)", rotation angle = 0
  Source counts = 255.6 +/- 46.0
  Background counts = 1860.5
  Rate = 0.009 +/- 0.002
[Fri Jul 20 06:25:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:25:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:25:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:25:43 2012] Source does appear to be extended
[Fri Jul 20 06:25:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:25:43 2012] Source is confused with source 75
[Fri Jul 20 06:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:26:40 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Fri Jul 20 06:26:40 2012] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.803
[Fri Jul 20 06:26:40 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.18"
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18.csv
[Fri Jul 20 11:42:03 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jul 20 11:42:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18.csv
[Fri Jul 20 11:42:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 11:42:05 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jul 20 11:42:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jul 20 11:42:05 2012] fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jul 20 11:42:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jul 20 11:42:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:10 2012] Warning, spatial fit 18 centroid is now closest to src. 30
[Fri Jul 20 18:24:11 2012] Spatial fit model total counts = 2124.730000, observed total counts = 2077.000000
[Fri Jul 20 18:24:11 2012] Offset between fit and detection position for source 25 = 0.196644 pixels
[Fri Jul 20 18:24:11 2012] Warning, changing simple spatial fit ID from 18 to 63
[Fri Jul 20 18:24:11 2012] 2124.962000 total counts/ 1861.630000 bgd. counts: snr = 6.103191
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.196644 pixels
  Position = (288.4, 323.5) = 16 54 18.21 -41 49 10.7
  Extent = 12.4 (8.4-14.4)", rotation angle = 0
  Source counts = 263.3 +/- 46.1
  Background counts = 1861.6
  Rate = 0.01 +/- 0.002
[Fri Jul 20 18:24:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:11 2012] Source does appear to be extended
[Fri Jul 20 18:24:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 18:25:03 2012] XMMSAS src. selection expression = ellipse(25039.658000, 28098.188000, 744.108021, 744.108021, 0.000000, X, Y)
[Fri Jul 20 18:25:03 2012] Writing source region out to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25_src.reg
[Fri Jul 20 18:25:03 2012] Extracting stamp from image fullrun_pn_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (246, 281) - (331, 366)
[Fri Jul 20 18:25:03 2012] XMMSAS bgd. selection expression = annulus(25039.658000, 28098.188000, 1240.180036, 2480.360071, X, Y) && !ellipse(26853.191280, 27709.137200, 473.130414, 473.130414, 0.000000, X, Y) && !ellipse(25774.528200, 26735.513200, 622.540818, 622.540818, 0.000000, X, Y) && !ellipse(26507.247800, 25954.661400, 411.338412, 411.338412, 0.000000, X, Y) && !ellipse(23154.833832, 27661.005310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.522000, 27204.836000, 392.259211, 392.259211, 0.000000, X, Y) && !ellipse(24915.001434, 26844.700623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.503510, 26812.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25917.760000, 26835.594000, 655.457619, 655.457619, 0.000000, X, Y) && !ellipse(27573.644226, 25780.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.025665, 31361.478943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.648651, 31035.499756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.590515, 30632.867218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.338593, 30330.002716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.628632, 29699.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.534821, 29174.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22932.953033, 29209.755585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.851685, 29057.749847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.275909, 28923.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.856842, 28827.617218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.978973, 27773.180298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27505.540070, 27199.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24375.148000, 26362.158000, 1174.448034, 1174.448034, 0.000000, X, Y) && !ellipse(22670.442322, 26141.348846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.686035, 25797.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.932007, 25625.248322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.841200, 25851.218800, 267.492808, 267.492808, 0.000000, X, Y) && !ellipse(24618.931152, 24929.720917, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 18:25:03 2012] Writing fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25.gif
[Fri Jul 20 18:45:12 2012] Mean detx,y = (-1635.10, -752.71) 
[Fri Jul 20 18:45:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 18:45:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 18:45:40 2012] Setting source spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul 20 18:45:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jul 21 02:37:14 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:14 2012] Error reading totcts from fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jul 21 02:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:16 2012] Using photon index=1.80, rate=0.00965, arf fullrun_pn_xmm0109490401_pi300-10000_pass1_cl_src25.arf
[Sat Jul 21 02:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:16 2012] Updating source flux to 4.8e-14
[Sat Jul 21 02:42:33 2012] Flag c found in src. 25 procflags, skipping spectral fitting