[Thu Jul 19 19:46:56 2012] Detection parameters:
  Position = (302.9, 292.2) = 16 54 12.56 -41 51 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 14.4
  Background counts = 46.9
  Rate = 0.002 +/- 0.0005

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 0.55'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.960
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 6.71"
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70.csv
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70.csv
[Fri Jul 20 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:18 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri Jul 20 06:25:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jul 20 06:25:18 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Jul 20 06:25:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jul 20 06:25:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:17 2012] Source 69 is offset by -6.229949 and 5.386451 pixels which is larger than
2 X fitted extent = 0.881297 x 0.881297, not incorporating fit results
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:17 2012] Source is confused with source 43
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.960
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 6.71"
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62.csv
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62.csv
[Fri Jul 20 18:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jul 20 18:23:48 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Fri Jul 20 18:24:39 2012] Warning, spatial fit 62 centroid is now closest to src. 5
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:18 2012] XMMSAS src. selection expression = ellipse(26301.598450, 25374.685242, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 00:38:18 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69_src.reg
[Sat Jul 21 00:38:18 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (265, 255) - (340, 330)
[Sat Jul 21 00:38:18 2012] XMMSAS bgd. selection expression = annulus(26301.598450, 25374.685242, 1087.500000, 2175.000000, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.772200, 25943.070000, 381.945611, 381.945611, 0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(25815.648200, 24431.460000, 446.508813, 297.104009, 345.329800, X, Y) && !ellipse(26145.918000, 26467.446000, 222.751206, 222.751206, 0.000000, X, Y) && !ellipse(27610.177429, 25787.189178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27165.995000, 24911.921400, 305.391209, 305.391209, 0.000000, X, Y) && !ellipse(25694.162000, 25726.471600, 1073.024031, 1073.024031, 0.000000, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.158000, 23771.035420, 261.982408, 151.478404, 89.977059, X, Y) && !ellipse(25268.758000, 25405.856000, 1043.488030, 1043.488030, 0.000000, X, Y) && !ellipse(25876.181800, 23358.711000, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(26258.255096, 24264.436951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y)
[Sat Jul 21 00:38:18 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69.gif
[Sat Jul 21 00:55:54 2012] Mean detx,y = (786.88, -1946.62) 
[Sat Jul 21 00:55:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:56:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:56:05 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jul 21 00:56:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Jul 21 02:21:41 2012] Not generating rmf since there are only 63 counts
[Sat Jul 21 02:21:41 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:20 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:20 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jul 21 02:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:21 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src69.arf
[Sat Jul 21 02:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:21 2012] Updating source flux to 2.7e-14
[Sat Jul 21 02:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting