[Thu Jul 19 19:46:56 2012] Detection parameters:
  Position = (305.5, 311.0) = 16 54 11.54 -41 50 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.7 +/- 17.4
  Background counts = 48.6
  Rate = 0.003 +/- 0.0006

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 1.05'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.136
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 6.95"
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48.csv
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48.csv
[Fri Jul 20 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri Jul 20 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:17 2012] Warning, spatial fit 48 centroid is now closest to src. 1
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:17 2012] Source is confused with source 32
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.136
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 6.95"
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45.csv
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45.csv
[Fri Jul 20 18:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Jul 20 18:23:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jul 20 18:23:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 20 18:23:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:39 2012] Source 62 is offset by 6.862761 and 3.663758 pixels which is larger than
2 X fitted extent = 2.368625 x 2.368625, not incorporating fit results
[Fri Jul 20 18:24:39 2012] Warning, spatial fit 45 centroid is now closest to src. 32
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(26529.490234, 27011.316986, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (268, 274) - (343, 349)
[Sat Jul 21 00:38:17 2012] XMMSAS bgd. selection expression = annulus(26529.490234, 27011.316986, 1087.500000, 2175.000000, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28685.805301, 29044.587267, 434.342033, 395.309178, 19.467355, X, Y) && !ellipse(26496.772200, 25943.070000, 381.945611, 381.945611, 0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(25815.648200, 24431.460000, 446.508813, 297.104009, 345.329800, X, Y) && !ellipse(28212.398000, 30067.602000, 1363.792039, 1363.792039, 0.000000, X, Y) && !ellipse(26145.918000, 26467.446000, 222.751206, 222.751206, 0.000000, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(27610.177429, 25787.189178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.859955, 29946.364258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(27165.995000, 24911.921400, 305.391209, 305.391209, 0.000000, X, Y) && !ellipse(25694.162000, 25726.471600, 1073.024031, 1073.024031, 0.000000, X, Y) && !ellipse(28799.372000, 27247.474400, 310.768797, 310.768797, 0.000000, X, Y) && !ellipse(25268.758000, 25405.856000, 1043.488030, 1043.488030, 0.000000, X, Y) && !ellipse(27832.732605, 29040.770935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.355600, 29441.293000, 640.779218, 640.779218, 0.000000, X, Y) && !ellipse(26301.598450, 25374.685242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.255096, 24264.436951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62.gif
[Sat Jul 21 00:51:16 2012] Mean detx,y = (495.55, -498.35) 
[Sat Jul 21 00:51:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:51:27 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:51:28 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sat Jul 21 00:51:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sat Jul 21 02:14:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 02:14:07 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:20 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00338, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src62.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 4.3e-14
[Sat Jul 21 02:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting