[Thu Jul 19 19:46:56 2012] Detection parameters:
  Position = (266.6, 325.9) = 16 54 26.69 -41 48 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 14.1
  Background counts = 34.6
  Rate = 0.003 +/- 0.0005

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 3.05'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.95"
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55.csv
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55.csv
[Fri Jul 20 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Jul 20 06:26:17 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 10.406565 pixels away
[Fri Jul 20 06:26:17 2012] Source 60 is offset by -4.378025 and 2.336084 pixels which is larger than
2 X fitted extent = 1.253117 x 1.253117, not incorporating fit results
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:17 2012] Source is confused with source 30
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.95"
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51.csv
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51_1.ximg exists
[Fri Jul 20 18:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51.csv
[Fri Jul 20 18:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Jul 20 18:23:48 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Jul 20 18:24:39 2012] Source 60 is offset by -0.135843 and 6.167854 pixels which is larger than
2 X fitted extent = 1.511761 x 1.511761, not incorporating fit results
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(23142.211823, 28300.883301, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (229, 288) - (304, 363)
[Sat Jul 21 00:38:17 2012] XMMSAS bgd. selection expression = annulus(23142.211823, 28300.883301, 1087.500000, 2175.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(23284.509200, 27205.319600, 306.522409, 306.522409, 0.000000, X, Y) && !ellipse(23150.702400, 27698.622800, 285.984808, 285.984808, 0.000000, X, Y) && !ellipse(21943.427340, 29137.315600, 291.118408, 291.118408, 0.000000, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(25694.162000, 25726.471600, 1073.024031, 1073.024031, 0.000000, X, Y) && !ellipse(22632.127600, 26101.727600, 475.074414, 294.395208, 336.063783, X, Y) && !ellipse(25268.758000, 25405.856000, 1043.488030, 1043.488030, 0.000000, X, Y) && !ellipse(24090.355600, 29441.293000, 640.779218, 640.779218, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60.gif
[Sat Jul 21 00:52:32 2012] Mean detx,y = (3650.28, 853.70) 
[Sat Jul 21 00:52:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:52:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:52:42 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jul 21 00:52:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat Jul 21 02:20:25 2012] Not generating rmf since there are only 80 counts
[Sat Jul 21 02:20:25 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:20 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:20 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src60.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 3.8e-14
[Sat Jul 21 02:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting