[Thu Jul 19 19:46:56 2012] Detection parameters:
  Position = (320.5, 334.4) = 16 54 5.71 -41 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 15.4
  Background counts = 45.7
  Rate = 0.003 +/- 0.0005

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 3.06'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.152
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.96"
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57.csv
[Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57.csv
[Fri Jul 20 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jul 20 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jul 20 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:26:17 2012] Source 58 is offset by 4.787386 and 7.672884 pixels which is larger than
2 X fitted extent = 0.835816 x 0.835816, not incorporating fit results
[Fri Jul 20 06:26:17 2012] Source 58 is offset by -6.035947 and 0.687625 pixels which is larger than
2 X fitted extent = 2.593678 x 2.593678, not incorporating fit results
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 15:21:56 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri Jul 20 15:21:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.152
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.96"
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jul 20 18:23:47 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src53 appears to have run properly
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jul 20 18:23:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jul 20 18:23:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jul 20 18:23:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:24:39 2012] Source 58 is offset by 4.787386 and 7.672884 pixels which is larger than
2 X fitted extent = 0.835816 x 0.835816, not incorporating fit results
[Fri Jul 20 18:24:39 2012] Source 58 is offset by -6.042775 and 0.658498 pixels which is larger than
2 X fitted extent = 2.569899 x 2.569899, not incorporating fit results
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(27832.732605, 29040.770935, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (283, 297) - (358, 372)
[Sat Jul 21 00:38:18 2012] XMMSAS bgd. selection expression = annulus(27832.732605, 29040.770935, 1087.500000, 2175.000000, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28685.805301, 29044.587267, 434.342033, 395.309178, 19.467355, X, Y) && !ellipse(28308.577054, 30115.231876, 463.762315, 370.347723, 352.326056, X, Y) && !ellipse(29394.521464, 31038.430682, 543.709868, 319.974340, -0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(28212.398000, 30067.602000, 1363.792039, 1363.792039, 0.000000, X, Y) && !ellipse(29670.705841, 31510.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.859955, 29946.364258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(28799.372000, 27247.474400, 310.768797, 310.768797, 0.000000, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27292.412903, 31365.068542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.813782, 30664.621368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y) && !ellipse(29862.714905, 28739.990631, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 00:38:18 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58.gif
[Sat Jul 21 00:52:57 2012] Mean detx,y = (-1266.41, 1234.74) 
[Sat Jul 21 00:52:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:53:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:53:08 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jul 21 00:53:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jul 21 02:20:36 2012] Not generating rmf since there are only 82 counts
[Sat Jul 21 02:20:36 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:20 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:20 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00285, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src58.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:21 2012] Updating source flux to 3.4e-14
[Sat Jul 21 02:39:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting