[Thu Jul 19 19:46:55 2012] Detection parameters:
  Position = (297.1, 296.2) = 16 54 14.80 -41 51 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 17.2
  Background counts = 47.1
  Rate = 0.004 +/- 0.0006

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 0.19'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 6.52"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40.csv
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40.csv
[Fri Jul 20 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri Jul 20 06:26:17 2012] Warning, spatial fit 40 centroid is now closest to src. 67
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 788.490000, observed total counts = 785.000000
[Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 43 = 1.238016 pixels
[Fri Jul 20 06:26:17 2012] Warning, changing simple spatial fit ID from 40 to 50
[Fri Jul 20 06:26:17 2012] 791.624000 total counts/ 589.283000 bgd. counts: snr = 8.335313
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.238016 pixels
  Position = (295.9, 296.3) = 16 54 15.28 -41 51 9.3
  Extent = 13.4 (13.4-26.8)", rotation angle = 0
  Source counts = 202.3 +/- 28.1
  Background counts = 589.3
  Rate = 0.006 +/- 0.0009
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 06:26:17 2012] Source is confused with source 67
[Fri Jul 20 06:26:17 2012] Source is confused with source 69
[Fri Jul 20 06:26:17 2012] Source is confused with source 68
[Fri Jul 20 15:21:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Fri Jul 20 15:21:56 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 13.41"
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38.csv
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38.csv
[Fri Jul 20 18:23:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Jul 20 18:23:48 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Fri Jul 20 18:24:39 2012] Warning, spatial fit 38 centroid is now closest to src. 68
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(25694.162000, 25726.471600, 804.768023, 804.768023, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (250, 250) - (342, 343)
[Sat Jul 21 00:38:17 2012] XMMSAS bgd. selection expression = annulus(25694.162000, 25726.471600, 1341.280039, 2682.560077, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.772200, 25943.070000, 381.945611, 381.945611, 0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(23284.509200, 27205.319600, 306.522409, 306.522409, 0.000000, X, Y) && !ellipse(23150.702400, 27698.622800, 285.984808, 285.984808, 0.000000, X, Y) && !ellipse(25815.648200, 24431.460000, 446.508813, 297.104009, 345.329800, X, Y) && !ellipse(26145.918000, 26467.446000, 222.751206, 222.751206, 0.000000, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(27610.177429, 25787.189178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(27165.995000, 24911.921400, 305.391209, 305.391209, 0.000000, X, Y) && !ellipse(22632.127600, 26101.727600, 475.074414, 294.395208, 336.063783, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.158000, 23771.035420, 261.982408, 151.478404, 89.977059, X, Y) && !ellipse(25268.758000, 25405.856000, 1043.488030, 1043.488030, 0.000000, X, Y) && !ellipse(23142.211823, 28300.883301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.732605, 29040.770935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.181800, 23358.711000, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(26301.598450, 25374.685242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.255096, 24264.436951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43.gif
[Sat Jul 21 00:49:36 2012] Mean detx,y = (1278.76, -1732.24) 
[Sat Jul 21 00:49:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:49:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:49:47 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 21 00:49:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:19 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00645, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src43.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 8.1e-14
[Sat Jul 21 02:39:59 2012] Flag c found in src. 43 procflags, skipping spectral fitting