[Thu Jul 19 19:46:55 2012] Detection parameters:
  Position = (274.3, 308.2) = 16 54 23.67 -41 50 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.1 +/- 21.2
  Background counts = 40.1
  Rate = 0.007 +/- 0.0007

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 1.88'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.038
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.37"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22.csv
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22.csv
[Fri Jul 20 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 1231.060000, observed total counts = 1231.000000
[Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 36 = 0.699771 pixels
[Fri Jul 20 06:26:17 2012] Warning, changing simple spatial fit ID from 22 to 9
[Fri Jul 20 06:26:17 2012] 1275.310900 total counts/ 1223.810000 bgd. counts: snr = 1.472170
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.699771 pixels
  Position = (273.7, 308.1) = 16 54 23.94 -41 50 17.7
  Extent = 2.8 (1.9-3.8)", rotation angle = 0
  Source counts = 51.5 +/- 35.7
  Background counts = 1223.8
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability