[Thu Jul 19 19:46:55 2012] Detection parameters:
  Position = (285.0, 323.1) = 16 54 19.50 -41 49 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.8 +/- 19.2
  Background counts = 41.0
  Rate = 0.007 +/- 0.0007

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 2.04'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.45"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23.csv
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23.csv
[Fri Jul 20 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 802.893000, observed total counts = 798.000000
[Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 29 = 0.188655 pixels
[Fri Jul 20 06:26:17 2012] 799.593500 total counts/ 700.792000 bgd. counts: snr = 3.732235
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.188655 pixels
  Position = (284.9, 323.0) = 16 54 19.58 -41 49 12.7
  Extent = 4.3 (3.7-5.0)", rotation angle = 0
  Source counts = 98.8 +/- 28.3
  Background counts = 700.8
  Rate = 0.003 +/- 0.0009
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 758.132000, observed total counts = 754.000000
[Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 29 = 0.149831 pixels
[Fri Jul 20 06:26:17 2012] Warning, changing simple spatial fit ID from 23 to 45
[Fri Jul 20 06:26:17 2012] 750.378800 total counts/ 673.386000 bgd. counts: snr = 2.967004
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.149831 pixels
  Position = (284.8, 323.2) = 16 54 19.61 -41 49 12.2
  Extent = 3.7 (2.8-4.8)", rotation angle = 0
  Source counts = 77.0 +/- 27.4
  Background counts = 673.4
  Rate = 0.002 +/- 0.0009
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 15:21:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 3.67"
[Fri Jul 20 15:21:56 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.245
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 3.67"
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22.csv
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jul 20 18:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22.csv
[Fri Jul 20 18:23:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jul 20 18:23:47 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jul 20 18:23:47 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jul 20 18:24:39 2012] Spatial fit model total counts = 800.180000, observed total counts = 798.000000
[Fri Jul 20 18:24:39 2012] Offset between fit and detection position for source 29 = 0.148153 pixels
[Fri Jul 20 18:24:39 2012] 798.200000 total counts/ 697.814000 bgd. counts: snr = 3.800172
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.148153 pixels
  Position = (284.9, 323.0) = 16 54 19.58 -41 49 12.7
  Extent = 4.2 (3.5-5.2)", rotation angle = 0
  Source counts = 100.4 +/- 28.3
  Background counts = 697.8
  Rate = 0.003 +/- 0.0009
[Fri Jul 20 18:24:39 2012] Spatial fit model total counts = 738.912000, observed total counts = 738.000000
[Fri Jul 20 18:24:39 2012] Offset between fit and detection position for source 29 = 0.145339 pixels
[Fri Jul 20 18:24:39 2012] Warning, changing simple spatial fit ID from 22 to 64
[Fri Jul 20 18:24:39 2012] 740.444800 total counts/ 669.187000 bgd. counts: snr = 2.754601
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.145339 pixels
  Position = (284.9, 323.2) = 16 54 19.56 -41 49 12.1
  Extent = 4.1 (2.4-5.6)", rotation angle = 0
  Source counts = 71.3 +/- 27.2
  Background counts = 669.2
  Rate = 0.002 +/- 0.0009
[Fri Jul 20 18:24:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:39 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 18:24:39 2012] Source does appear to be extended
[Fri Jul 20 18:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(24736.724000, 28069.042000, 244.270807, 244.270807, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (271, 309) - (299, 337)
[Sat Jul 21 00:38:17 2012] XMMSAS bgd. selection expression = annulus(24736.724000, 28069.042000, 407.118012, 814.236023, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24665.461340, 26912.078200, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.182896, 28935.657931, 613.646418, 247.841510, 52.469876, X, Y) && !ellipse(23142.211823, 28300.883301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.355600, 29441.293000, 640.779218, 640.779218, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.970000, 25221.804000, 2143.368062, 2143.368062, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29.gif
[Sat Jul 21 00:45:26 2012] Mean detx,y = (2105.49, 649.38) 
[Sat Jul 21 00:45:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:45:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:45:36 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jul 21 00:45:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jul 21 02:04:50 2012] Not generating rmf since there are only 71 counts
[Sat Jul 21 02:04:50 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:19 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src29.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 3.6e-14
[Sat Jul 21 02:39:59 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting