[Thu Jul 19 19:46:55 2012] Detection parameters: Position = (282.0, 329.0) = 16 54 20.69 -41 48 46.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.3 +/- 16.5 Background counts = 38.8 Rate = 0.004 +/- 0.0006 [Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 2.52' [Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.69" [Fri Jul 20 03:17:22 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778 [Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.69" [Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45.ximg exists [Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45.csv [Fri Jul 20 06:25:16 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45_1.ximg exists [Fri Jul 20 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45.csv [Fri Jul 20 06:25:16 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists [Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists [Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly [Fri Jul 20 06:26:17 2012] Warning, spatial fit 45 centroid is now closest to src. 29 [Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 426.040000, observed total counts = 424.000000 [Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 27 = 4.302006 pixels [Fri Jul 20 06:26:17 2012] Warning, changing simple spatial fit ID from 45 to 63 [Fri Jul 20 06:26:17 2012] 424.617027 total counts/ 424.617000 bgd. counts: snr = 0.000001 Spatial fit parameters: Offset between fit and detection position for source 27 = 4.302006 pixels Position = (284.4, 332.6) = 16 54 19.74 -41 48 31.3 Extent = 16.1 (16.1-32.3)", rotation angle = 0 Source counts = 0.0 +/- 20.6 Background counts = 424.6 Rate = 9e-10 +/- 0.0007 Deleting source due to low Poisson probability