[Thu Jul 19 19:46:55 2012] Detection parameters:
  Position = (290.8, 333.0) = 16 54 17.25 -41 48 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.6 +/- 15.3
  Background counts = 40.5
  Rate = 0.004 +/- 0.0006

[Thu Jul 19 19:46:56 2012] Off-axis axis estimate = 2.57'
[Fri Jul 20 03:17:22 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:17:22 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jul 20 03:17:22 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Fri Jul 20 03:17:22 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.71"
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37.csv
[Fri Jul 20 06:25:15 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jul 20 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37.csv
[Fri Jul 20 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jul 20 06:25:17 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jul 20 06:25:17 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Jul 20 06:26:17 2012] Spatial fit model total counts = 559.645000, observed total counts = 597.000000
[Fri Jul 20 06:26:17 2012] Offset between fit and detection position for source 26 = 0.296347 pixels
[Fri Jul 20 06:26:17 2012] 529.698600 total counts/ 476.959000 bgd. counts: snr = 2.414884
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.296347 pixels
  Position = (290.6, 332.9) = 16 54 17.36 -41 48 30.0
  Extent = 3.8 (2.7-5.5)", rotation angle = 0
  Source counts = 52.7 +/- 23.0
  Background counts = 477.0
  Rate = 0.002 +/- 0.0007
[Fri Jul 20 06:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 06:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 06:26:17 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 06:26:17 2012] Source does appear to be extended
[Fri Jul 20 06:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 15:21:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 15:21:56 2012] Initial guess for spatial extent in simple fitting = 3.84"
[Fri Jul 20 15:21:56 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.179
[Fri Jul 20 15:21:56 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 3.84"
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src36.ximg exists
[Fri Jul 20 18:23:46 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri Jul 20 18:23:46 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_src36 appears to have run properly
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri Jul 20 18:23:48 2012] fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Jul 20 18:23:48 2012] Fit fullrun_mos2_xmm0109490401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Jul 20 18:24:39 2012] Spatial fit model total counts = 581.267000, observed total counts = 623.000000
[Fri Jul 20 18:24:39 2012] Offset between fit and detection position for source 26 = 0.341116 pixels
[Fri Jul 20 18:24:39 2012] 525.667100 total counts/ 459.781000 bgd. counts: snr = 3.072687
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.341116 pixels
  Position = (290.4, 333.2) = 16 54 17.44 -41 48 28.8
  Extent = 7.7" x 3.1", rotation angle = 52
  Source counts = 65.9 +/- 22.9
  Background counts = 459.8
  Rate = 0.002 +/- 0.0007
[Fri Jul 20 18:24:40 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:24:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:24:40 2012] Assessing source extent using major
[Fri Jul 20 18:24:40 2012] Source does appear to be extended
[Fri Jul 20 18:24:40 2012] Computing asymmetry using major and minor axis, asym = 2.48
[Fri Jul 20 18:24:40 2012] Source is asymmetric
[Sat Jul 21 00:38:17 2012] XMMSAS src. selection expression = ellipse(25212.182896, 28935.657931, 460.234813, 185.881132, 52.469876, X, Y)
[Sat Jul 21 00:38:17 2012] Writing source region out to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26_src.reg
[Sat Jul 21 00:38:17 2012] Extracting stamp from image fullrun_mos2_xmm0109490401_pi300-10000_cl_sm2.00.img.gz, (264, 307) - (317, 360)
[Sat Jul 21 00:38:17 2012] XMMSAS bgd. selection expression = annulus(25212.182896, 28935.657931, 767.058022, 1534.116044, X, Y) && !ellipse(26864.294739, 27702.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25734.946200, 26737.702980, 682.213620, 320.856809, 320.410400, X, Y) && !ellipse(24736.724000, 28069.042000, 325.694409, 325.694409, 0.000000, X, Y) && !ellipse(26109.637177, 27367.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26529.490234, 27011.316986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23142.211823, 28300.883301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.813782, 30664.621368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.355600, 29441.293000, 640.779218, 640.779218, 0.000000, X, Y) && !ellipse(24121.312286, 28324.088257, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 00:38:17 2012] Writing fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26.gif
[Sat Jul 21 00:49:11 2012] Mean detx,y = (1532.37, 1426.78) 
[Sat Jul 21 00:49:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 00:49:21 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 00:49:21 2012] Setting source spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jul 21 00:49:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Jul 21 02:09:56 2012] Not generating rmf since there are only 65 counts
[Sat Jul 21 02:09:56 2012] rmf not generated due to insufficient counts
[Sat Jul 21 02:37:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 02:37:19 2012] Error reading totcts from fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jul 21 02:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 02:37:20 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0109490401_pi300-10000_pass1_cl_src26.arf
[Sat Jul 21 02:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 02:37:20 2012] Updating source flux to 3.8e-14
[Sat Jul 21 02:39:59 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting